1-2
Figure 1-2
Configuration restore page
z
After you click the upper
Browse
button in this figure, the file upload dialog box appears. You can
select the
.cfg
file to be uploaded, and then click
Apply
.
z
After you click the lower
Browse
button in this figure, the file upload dialog box appears. You can
select the
.xml
file to be uploaded, and then click
Apply
.
Save Configuration
The save configuration module provides the function to save the current configuration to the
configuration file (
.cfg
file or
.xml
file) for the next startup.
Select
Device
or
Configuration
from the navigation tree, and then click the
Save
tab to enter the save
configuration confirmation page, as shown in
Figure 1-3
.
Figure 1-3
Save configuration confirmation
Click the
Save Current Settings
button to save the current configuration to the configuration file.
z
Saving the configuration takes a period of time.
z
The system does not support the operation of saving configuration of two or more consecutive
users. If such a case occurs, the system prompts the latter users to try later.
Summary of Contents for 2928 - Baseline Plus Switch PWR
