1-4
Item
Description
DHCP
BOOTP
Manual
Configure the way in which the VLAN interface gets an IPv4 address.
Allow the VLAN interface to automatically obtain an IP address by selecting
the
DHCP
or
BOOTP
option, or manually assign the VLAN interface an IP
address by selecting the
Manual
option.
Modif
y IPv4
Addre
ss
Admin
Status
Select
Up
or
Down
in the
Admin Status
drop-down list to bring up or shut
down the selected VLAN interface.
When the VLAN interface fails, you can shut down and then bring up the
VLAN interface, which may restore it.
By default, a VLAN interface is down if all Ethernet ports in the VLAN are
down; otherwise, the VLAN interface is up.
z
The current VLAN interface state in the Modify IPv4 Address frames
changes as the VLAN interface state is modified in the Admin Status
drop-down list.
z
The state of each port in the VLAN is independent of the VLAN interface
state.
Return to
VLAN interface configuration task list
.
Summary of Contents for 2928 - Baseline Plus Switch PWR
