1-6
z
Select
1 – Local
in the
Mirroring Group ID
drop-down list.
z
Select
Mirror Port
in the
Port Type
drop-down list.
z
Select
both
in the
Stream Orientation
drop-down list.
z
Select GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 on the chassis front panel.
z
Click
Apply
. A configuration progress dialog box appears, as shown in
Figure 1-7
.
Figure 1-7
Configuration progress dialog box
z
After the configuration process is complete, click
Close
.
# Configure the monitor port.
Click
Modify Port
to enter the page for configuring ports for the mirroring group, as shown in
Figure 1-8
.
Figure 1-8
Configure the monitor port
z
Select
1 – Local
in the
Mirroring Group ID
drop-down list.
z
Select
Monitor Port
in the
Port Type
drop-down list.
z
Select GigabitEthernet 1/0/3 on the chassis front panel.
Summary of Contents for 2928 - Baseline Plus Switch PWR
