Zontes ZT350-EURO V 2022, Руководство по обслуживанию

Страница: 9 / 118

1-FRAME&ELECTRONIC COMPONENT
8
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1184300-008000 ZT350-X wiring harness assembly (A) 1
2 1224300-111000 Reverse buckle Velcro strap (20×300mm) 1
3 1240300-007000 HJ125-6 Battery rubber gasket 1
4 1224100-037000 Grade 0 flame retardant tie (black 3.6×295) 3
5 1224300-110000 Reverse buckle Velcro strap (20×200mm) 11
Fig.1 FRAME&ELECTRONIC
COMPONENT
Electricity assembly 1
PROCEDURE:
●
Main harness
Unplug all electrical components connected to the main harness. Different connector modes are different, and
the operation is based on the actual situation. A slotted screwdriver, pliers, scissors and other tools may be
needed to assist.
There are 2 tales at the point of the driving head
①
, and the tie
⑷
at the left cover should be cut, and the entire
body has 11 tie
⑶
and a tie
⑵
.
●
ECU
Find the ECU plug at the rear of the frame, press the anti release buckle at
③
, rotate clockwise and pull out the
plug. Tidy up the fuse box and harness and take out the ECU
⑹
.
CAUTION:
●
You need to remove the head assembly, the direction, the assembly, the cushion, the fuel tank, etc.
●
Pay attention to the restrictions of the bracket when removing the flash device and the dumping switch.
●
Pay attention to the direction and angle when inserting the electrical device, so as to avoid poor contact with
bending electrical computers and prohibit violent operations.
6 1050958-014000 MSE6.0 controller - ZT184MP (matching split sensor /
Euro V)
1 Bosch EFI