Zontes ZT350-EURO V 2022, Руководство по обслуживанию

Страница: 97 / 118

11-FUEL TANK LINER ASSEMBLY
96
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1250205-043093 GB70.1M8×55(environmental color) 2
2 1251900-028093 ZT250-R fuel tank flat pad φ9×φ37.5×2 2
3 1244100-020000 ZT250-S tank pressure glue 2
4 1244100-053000 ZT250-S fuel tank gasket 2
5 1274100-080000 ZT250-R cushion fixing block 1
6 1244200-084000 ZT310-X1 fuel tank cover limit glue 2
7 4034200-009000 ZT310-T fuel tank liner 1
8 1050954-006000 ZT250
－
R EFI High Pressure Tubing Sub-assembly 1
Fig.2 FUEL TANK LINER
ASSEMBLY
Bully component in the fuel tank
PROCEDURE:
●
Inner biliary components of the fuel tank
The biliary component in the fuel tank is removed with a 6#inner hexagonal tool to remove the bolt
⑴
.
Raise the tail of the bile component in the fuel tank, remove the gum
⑷
, and the cushion fixed block
⑸
.
Pull the main line beam card
①
to pry open and pull out the plug down.
Find the limit card ring on the high -pressure oil pipe division component.
Continue to raise the bile component in the oil tank, clamp the tube on the ventlee in the direction of the arrow,
and pull out the ventilation.
Put the tank inner bile component slightly left and right to remove it at the same time.
Two pieces of limited glue are taken from the bile
⑺
in the fuel tank, and the limited glue is pasted with double
-sided glue in the fuel tank with double -sided glue.
CAUTION:
●
The high -pressure oil pipe should maintain the horizontal direction, and do not pull out forcibly.
●
Remove the cushion, side cover, fuel tank cover, etc. in advance.
●
When disassembling the high -pressure oil pipe, it must be fully cooled by the engine and muffler before it can
be operated to prevent the fuel from accidentally igniting the fire.
●
Near the parking lot, fireworks, answering or calling to prevent accidents should be prohibited.
●
A small amount of fuel leakage when pulling out the component of the high -pressure oil pipes should prevent
fuel dripping from outside or muffler outside the engine.
●
It is recommended to use the fuel pump to draw or consume fuel before disassembling the fuel pump before
disassembling the fuel tank.