Zontes ZT350-EURO V 2022, Руководство по обслуживанию

Страница: 109 / 118

14-REAR COVER COMPONENT
108
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1174200-035000 ZT310 rear turn signal (including license plate light) 1
2 1251300-063093 Plywood M6×11×15(color Zinc) 2
3 1251100-102000 Non-standard bolt M6×16 (304 stainless steel) 2
4 1274100-057095 Flanging bushing φ6.2×φ8.4×3.5
＋
φ14×1.5 2
5 1244100-052000 Buffer rubber of flanging bushing (φ8.5×φ14×1) 2
6 1174100-002000 ZT250-S rear reflector 1
7 1270300-039000 HJ125-6 rear license light bracket 1
8 1251100-101000 Non-standard bolt M6×12 (304 stainless steel) 2
9 1224200-032000 ZT310-X Rear fender 1
10 1244100-006000 ZT250-S rear liceness rubber buffer 1
11 1250303-010093 GB6177.1M6 (environmental color) 2
12 1250502-010093 GB6177.1M6 (environmental color) 2
Fig.5 REAR COVER
COMPONENT
Rear Mud component 2
PROCEDURE:
●
Rear turn signal lamp
Remove 2 bolts
⑶
and remove the bushing
⑷
and buffer rubber
⑸
. Remove the rear turn signal lamp
⑴
. Do
not pull the cable forcibly during the removal process.
Remove the splint
⑵
from the rear turn signal lamp
⑴
.
●
Rear license plate bracket
Fix the head of the bolt
⑻
with a 6# hexagon socket tool, and remove the nut
⑾
with a 10# sleeve on the back
of the rear mudboard. Remove the bolt
⑻
and license plate support
⑺
from the rear mud plate
⑼
.
●
Rear reflector
Use 10# sleeve to remove the nut
①
of rear reflector
⑹
and remove rear reflector
⑹
.
●
Rear license plate buffer
Remove the rear license plate buffer glue
⑽
from the rear mud plate
⑼
.
CAUTION
：
●
Pay attention not to pull the cable forcibly during disassembly.
●
When reassembling, check whether there is pressure on the wire to prevent short circuit when tightening the
bolt.
●
The lamp cover shall be protected.