Zontes ZT350-EURO V 2022, Руководство по обслуживанию

Страница: 74 / 118

8-FRONT FORK COMPONENT
73
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1224100-010000 ZT250-S swell nail 6
2
1186400-009000 ZT350 Dual Port Universal USB Charging Cable
1
3 1224200-138000 ZT310-X1 head surrounding front interior 1
4 1244100-004000 ZT250-S Flanging bushing buffer 1
5 1274100-007000 ZT250-S flanging sleeve(φ6.4×φ9×6
＋
φ20×2) 1
6 1251112-001093 M6×16 Hexagon flange bolts (color Zinc) 1
7 1224200-026000 ZT310-X Head cover rear interior 1
PROCEDURE:
●
Disassembling the front interior component
Surround the front interior component with a small cross screw knife to press down the center of the expansion
nails, and remove the two expansion nails.
Find and unplug the connector of the USB charging cable.
Remove the bolts with 8#sleeve and remove the band.
Hold the left surrounding hand in one hand, and siege the left side of the interior to the left side of the back to
the back of the body slightly. Similarly, remove the right side. Separate the front surround interior component
from the back -encirclement interior component.
Siege the interior component before grasping, remove the USB charging cable, remove the buffer gum.
●
Surrounding the interior component
After surrounding the interior component, use a small cross screw knife to press down the center of the
expansion nails and remove the five expansion nails.After returning slightly, siege the interior and loosen it.
CAUTION:
●
Before disassembling the interior, remove the front surround assembly, fuel tank outer cover, and side cover
assembly in advance.
●
It is forbidden to pull the cable directly when plugging.
●
Pay attention when you open the buckle to prevent the card buckle from broken due to excessive strength.
Fig.19 FRONT FORK
COMPONENT
Surround interior component
(A+C)