Zontes ZT350-EURO V 2022, Руководство по обслуживанию

Страница: 67 / 118

8-FRONT FORK COMPONENT
66
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1251100-102000 Non-standard bolt M6×16 (304 stainless steel) 6
2 1274100-057095
Flanging bushing φ6.2×φ8.4×3.5
＋
φ14×1.5
6
3 1244100-052000 Buffer rubber of flanging bushing (φ8.5×φ14×1) 6
4 1224200-132000 ZT310-X1 windshield upper left pressure block 1
5 1224200-133000 ZT310-X1 windshield upper right pressure block 1
6 1224200-139000 ZT310-X1 windshield 1
7 1244200-080000 ZT310-X1 windshield lower pressure block pad 2
8 1264100-006000 ZT250-S Pedal circlip 4
9 1274200-204000 ZT310-X1 windshield lower left clamp 1
11 1274200-205000 ZT310-X1 windshield lower right clamp 1
ZT310-X rotated shaft of lower press block of wind
shield
1274200-030000
PROCEDURE:
●
Demolition wind glass component
The windshield components remove the two bolts
⑴
on the left, and remove the bushing
⑵
and the buffer glue
⑶
on the windshield upper left pressure block
⑷
.Follow the above steps off the windshield and the right pressure
block
⑸
. Keep the windshield
⑹
then remove the bolt
⑴
under the upper block, remove the band
⑵
and buffer
rubber
⑶
,and then remove the windshield
⑹
.
Remove the block pad
⑺
.
●
Windshield underwater block component component
Under the windshield under the pressure block component, hold the lower left clamp
⑼
and use the tool to push
the sacred spring
⑻
, and then remove the rotating shaft
⑽
.Remove the lower left clamp
⑼
.
Follow the above steps to remove the right pressure block
⑾
.
CAUTION:
●
During the disassembly process, the windshield should be protected to prevent scratching.
●
The stuck spring is small. Pay attention to keep it in the process of disassembly and prevent it from falling into
the vehicle.
Fig.12 FRONT FORK
COMPONENT
Windshore
10 4