Zontes ZT350-EURO V 2022, Руководство по обслуживанию

Страница: 11 / 118

1-FRAME&ELECTRONIC COMPONENT
10
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1244100-061000 ZT250 anti-water rubber of frame 4
2 1244100-002000 ZT250-S Side cover round rubber 8
3 1240300-007000 HJ125-6 Battery rubber gasket 1
4 1244100-019000 ZT250-S fuel tank spacing glue 1
5 1244100-004000 ZT250-S Flanging bushing buffer 4
6 1251100-101000 Non-standard bolt M6×12 (304 stainless steel) 1
7 1274300-025000 ZT350-R water tank water inlet fixing bracket 1
PROCEDURE:
●
Frame waterproof rubber plug
Remove the four waterproof rubber plugs
⑴
of the frame directly by hand.
●
Battery cushion
Directly remove 8 pieces of side cover glue
⑵
on both sides by hand.
●
Side cover cushion
After heating with a hot-air gun, tear off the battery rubber pad
⑶
directly by hand and clean up the residual
glue.
●
Fuel tank liner limit glue
Push out the fuel tank liner limit glues
⑷
then take off.
●
Buckle
Remove 1 bolt
⑹
of bolts in the line buckle with 4#inner hexagonal and remove the bracket
⑺
.
CAUTION:
●
It is necessary to remove the cushion, the outer cover of the fuel tank, the water tank decorative cover, the side
cover, the tail skirt, the crane on the engine.
●
All parts should be properly assembled.
Fig.3 FRAME&ELECTRONIC
COMPONENT
Frame plastic part