Zontes ZT350-EURO V 2022, Руководство по обслуживанию

Страница: 78 / 118

8-FRONT FORK COMPONENT
77
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1190100-408051 ZT310-VX left rearview mirror (dark gray) 1
2 1134200-011000 ZT310-V left hand rocker arm assembly 1
4 1250205-031091 GB70.1M6×30(stainless steel) 2
5 1184200-141000 ZT310-X1 Left Handle Switch 1
6 1244100-041000 ZT250-R left hand rubber sleeve 1
7 1134300-018000 ZT350-R balance block (aggravated) 1
8 1134200-010000 ZT310-VLeft hand rocker arm (CNC) 1
9 1244200-046000 ZT310-V clutch cable sheath 1
10 1251100-198000 Non-standard hexagon socket bolt M6×13-φ8×20 1
11 1251300-073000 GB/T6185 hexagonal nylon lock nut M6 1
12 1184200-170000 ZT310-V clutch switch 1
13 1250201-039000 GB818 cross recessed pan head screw M4×12 1
PROCEDURE:
●
Left mirror,right switch,rocker arm
Left rearview mirror, left switch, rocker arm refer to the "replacement clutch" steps to remove the clutch
line.Refer to the steps in the steps of "Right Handlery Components" and "Add Dynamic Lights, Adjust Rochest
Arms", respectively, left rearview mirrors
⑴
, rocker arms
⑵
, left sub -switch
⑶
, bolt
⑷
, left switch
⑸
, and
rocker arms.
●
Left hand handle rubber sleeve and balance weight assembly
The left hand holds the glue sleeve and the balance block assembly with 5#inner hexagon to twist the bolt on
the balance block to the state in the figure and out the balance block
⑺
.
Press the dust gun and press the arrow
①
instruction to blow into the left hand to put the tube between the tube
and the direction, and move the left hand to put the rubber cover
⑹
.
●
Replace the rocker and clutch switch as follows:
Use 5#Inner hexagonal fixation bolts
⑽
, and then remove the nut
⑾
salamander with a 10#sleeve or plum
blossom wrench, remove the bolts
⑽
, and then remove the left hand to put the rocker arm
⑻
.
First unplug the clutch switch line, then remove the bolt
⒀
with a cross screw knife, and remove the clutch
switch
⑿
.
The rotation adjusts the nut can adjust the glue cover between the rocker and the left hand to adapt to the feel of
different drivers.
CAUTION:
●
The vehicle should be fixed before operating.
1
●
Disassembly clutch lines are carried out according to the step -clutching steps.
●
Press when reassembling: the left hand to put the rubber cover-balance block-switch-left hand rocker
arm-left rearview mirror.Pay attention to the triangular symbols of the rocker assembly and the auxiliary
switch.
1184200-144000 3
Fig.23 FRONT FORK
COMPONENT
Left handle component (old paragraph)
ZT310-X Second Generation Left Handlebar Switch
(TFT)