Zontes ZT350-EURO V 2022, Руководство по обслуживанию

Страница: 108 / 118

14-REAR COVER COMPONENT
107
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1251700-058093 Flanging bushing φ8.2×φ11×4.5
＋
φ16×1.5 4
2 1250105-148093 GB5789M8×25(environmental color) 4
3 1250502-010093 GB96.1 φ6(environmental color) 2
4 1274100-018000 ZT250-S Anti-hot plate sleeve, muffler 2
5 1224200-033000 ZT310-X Back mudboard support cover plate 1
6 4024200-071051 ZT310-X rear mudguard bracket (dark gray matte) 1
7 1244100-052000 Buffer rubber of flanging bushing (φ8.5×φ14×1) 6
8 1251100-101000 Non-standard bolt M6×12 (304 stainless steel) 2
9 1251100-102000 Non-standard bolt M6×16 (304 stainless steel) 4
10 1274100-057095
Flanging bushing φ6.2×φ8.4×3.5
＋
φ14×1.5
4
CAUTION:
●
Remove the cushion in advance.
●
Be careful not to force the cable for the disassembly process.
●
When re -assembling, check whether there is a pressed wire to prevent short circuit when tightening the bolt.
●
The lamp outer cover needs to be protected.
Fig.4 REAR COVER
COMPONENT
Rear mud component 1
PROCEDURE:
●
Rear fender assembly
The rear push panel component is found to be connected to the cable connecting the cable and unplugged. The
color is three connectors of green+orange, green+blue, green+powder.
Use the 12#sleeve to remove the 4 bolts
⑵
and remove the muddy plate bracket component
①
and the band
⑴
. Do
not force the cable during the process of removing.
Remove the 2 bolts
⑺
and remove the bushing
⑽
and buffer rubber
⑺
. Remove the bracket cover
⑸
.
Remove the top 2 bolts
⑼
on the top, remove the pads
⑶
, buffer gel
⑺
and bushing
⑷
.
Remove the bottom 2 bolts
⑼
at the bottom, and remove the bushing
⑽
and buffer gel
⑺
. Remove the bracket
⑹.