Zontes ZT350-EURO V 2022, Руководство по обслуживанию

Страница: 86 / 118

8-FRONT FORK COMPONENT
85
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1251100-123093 non-standard bolt M8×25 (color zinc) 2
2 1251513-013000 Disc brake pipe copper washer φ 15× φ 10.2 × 1.5 2
3 1251100-112000 Disc brake pipe bolt M10×1
－
22 1
4 1250104-006097 GB16674M6×12 (chromed/HH) 4
5 1274200-119000 Single rocker rear flat fork tubing bracket 4
Fig.31 FRONT FORK
COMPONENT
Single rocker ABS brake system A-4
PROCEDURE:
●
RC-HU oil pipe
Place the oil pan under the rear disc brake caliper
In the previous step of the parameter, the brake fluid step is used to loosen the nut connected to the RC-HU
tubing and the pilot unit.
After wearing the waterproof gloves, remove the bolts
⑶
with a 12# sleeve; remove the copper washers
⑵
.
Remove the 4 bolts
⑷
and remove the 4 pieces of tubing bracket
⑸
.
●
Rear disc brake caliper
Using14# sleeve remove the 2 bolts
⑴
to remove the rear disc brake caliper.
CAUTION:
●
For the relevant precautions of the brake fluid, please refer to the previous description.
●
When replacing the oil pipe, rear brake switch line or disc brake main pump, it is recommended to replace the
copper pads at the same time.
●
The rear brake switch is prohibited from the rubber hat at the instructions of the rotation arrow. Replace this
switching line. Be careful not to let the cable entangle on the tool.
●
Be sure to remove the muffler and the engine before disassembling. The vehicle level should be fixed and then
disassembled.