Zontes ZT350-EURO V 2022, Руководство по обслуживанию

Страница: 90 / 118

9-WRAPAROUND COMPONENTS
89
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1174200-010000 ZT310-X Front right turning light 1
2 ZT350-X surrounds the right panel 1
3 1224200-035000 ZT310-X right decorative board of big plastic cover 1
4 1210201-394000 ZT310-X label of right panel of big plastic cover 1
5 1251100-101000 Non-standard bolt M6×12 (304 stainless steel) 2
6 1274100-057095 Flanging bushing φ6.2×φ8.4×3.5
＋
φ14×1.5 2
7 1244100-052000 Buffer rubber of flanging bushing (φ8.5×φ14×1) 2
8 1251300-063093 Plywood M6×11×15(color Zinc) 4
9 1224100-010000 ZT250-S swell nail 2
10 1251200-033093 Non-standard self-Tapping bolt ST4.2×12 4
PROCEDURE:
●
Disassemble the right siege panel sign
Right surround panel signs push the sign from the back of the right surround panel component, and clean up the
remnant rubber print.
●
Right turn signal component
Remove 4 self -attack screws in the right steering light component, and remove the right turning light. From the
panel component.
●
Right panel component
Remove 2 bolts of the right panel component, and remove the band
⑹ ⑹ ⑺
.
Use a small cross screw knife to press down the center of the expansion nail , and remove the two expansion nails.
Separate the right surround panel component from the right decorative panel component.
Take 2 plywood
⑻
from the right surrounding panel.
Take 2 plywood
⑻
from the right surrounding decorative board.
CAUTION:
●
Pay attention to prevent damage parts when disassembling. Protective measures are required to prevent
scratches.
●
When removing from the right surround panel component to the light, pull the cable.
Fig.4 WRAPAROUND
COMPONENTS
Right surround panel component