Zontes ZT350-EURO V 2022, Руководство по обслуживанию

Страница: 81 / 118

8-FRONT FORK COMPONENT
80
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 4094200-007051 ZT310-X direction handlebar pad M10×1.2 2
2 1274200-018000 ZT310
－
R gasket of upper connecting board 4
3 1244200-008000 ZT310-R buffer rubber of upper connecting board 4
4 4094300-001051 ZT350-R upper connection board (dark gray matte) 1
5 1251700-065000 ZT310-R bushing φ10×φ12×41 2
6 1250105-280000 GB5789 M10×1.25×60 (level 10.9 dacromet) 2
7 1274200-106000 ZT310-T right wiring bracket 1
8 1274200-105000 ZT310-T left wiring bracket 1
9 1250205-023000 GB70.1 inner hexagonal M8×35 (color Zinc) 2
11 1250501-007093 GB93 φ8 (environmental color) 2
12 1251100-121093 Non
－
standard bolt M6×25 (environmental color) 2
13 1250303-010093 GB6177.1M6 (environmental color) 1
14 1274200-179000 ZT310-X1 wiring bracket 1
15 1250105-137093 GB5789M6×16 (environmental color) 1
PROCEDURE:
●
Disassembling pad component
Use 14#sleeve to remove the nut
⑹
with 14#sleeves, remove the pad, buffer glue CD, and the band.
●
Shanglian board, faucet lock, wiring bracket
The upper board, faucet lock, and wiring bracket remove the bolt
⑼
with 6#inner hexagonal, and remove the
bracket
⑺
and bracket
⑻
.
Remove the bolts
⑿
with 6#inner hexagonal and remove the pads
⑾
and faucet locks
⑽
.Remove the upper
board
⑷
.
Use the 10#plum blossom wrench to fix the nut
⑴
, remove the bolt
⑶
with a 10#sleeve with one hand, and
remove the wiring bracket
⑵
.
CAUTION:
●
Keep protective measures to prevent scratching the appearance of the parts.
●
When re -assembling, you need to use the direction to ensure the center axis of the center and direction of the
pads on both sides. First assemble the 4 buffer glue to the upper plate, and then put them into the band
separately. It is necessary to ensure that the band and the buffer are flat, otherwise the assembly should be re -
assembled.When locking bolts, you need to ensure that the torque is 50N · m.Check whether the buffer glue is
overflowed, if there is any, you need to re -assemble.
ZT310 main lock (electromagnetic drive / wire length
450) assembly
1184200-138000 1
Fig.26 FRONT FORK
COMPONENT
Shanglian board, direction of the pad component
10