Zontes ZT350-EURO V 2022, Руководство по обслуживанию

Страница: 95 / 118

10-FUEL TANK HOUSING ASSEMBLY
94
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1251100-102000 Non-standard bolt M6×16 (304 stainless steel) 4
2 1274100-007000
ZT250-S flanging sleeve(φ6.4×φ9×6
＋
φ20×2)
4
3 1244100-004000 ZT250-S Flanging bushing buffer 6
4 ZT310-X fuel tank left 1
5 ZT310-X fuel tank right 1
6 1244200-084000 ZT310-X1 fuel tank cover limit glue 2
PROCEDURE:
●
Disassembling left fuel tank decorative cove
Remove the bolt of the left oil tank decorative cover with 4#inner hexagonal and remove the band.
Grasp the tail of the left decorative cover and lift it up slightly, and separate the buckle of the decorative cover
from the limited glue and pull out the order of
①
-
②
, pull out the left cover component of the fuel tank.
Take the lower and lower buffer of the left cover of the fuel tank.
●
right fuel tank decorative cover
The right fuel tank decorative cover follows the steps of the left cover of the fuel tank to remove the fuel tank
right cover.
CAUTION:
●
During the disassembly process, the material should be protected to prevent damage to the paint surface. The
fuel tank cover is long, and it should be operated or held in both hands during disassembly or assembly.
●
When assembly, install the stuck nails in order.Pay attention to the left and right hoods of the fuel tank, it is
recommended to install the right cover and then the left cover.
Fig.3 FUEL TANK
HOUSING ASSEMBLY
Oil tank decorative cover component