Zontes ZT350-EURO V 2022, Руководство по обслуживанию

Страница: 94 / 118

10-FUEL TANK HOUSING ASSEMBLY
93
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 ZT350-X Fuel Tank middle Cover 1
2 1184200-002000 ZT310 electronic fuel tank lock 1
3 ZT350-X Fuel Tank outer Cover 1
4 1224100-014000 ZT250-S tank cover spinning damping 1
5 1274100-021000 ZT250-S tank cover rotating stents 1
6 1274100-090000 ZT250-S rotating axle of fuel tank outside cover 1
7 1260100-215000 ZT310-T storage box cover rotating shaft limit circlip 1
【
1
】
Fig.2 FUEL TANK
HOUSING ASSEMBLY
Found cover, fuel tank cover, fuel tank lock
PROCEDURE:
●
Locking of the fuel tank
The fuel tank lock is carefully pry open the buckle at both ends of the middle cover with a word screwdriver,
remove the fuel tank lock, and pay attention to prevent damage to the buckle.
●
The outer cover of the fuel tank
The outer lid components of the fuel tank are clamped with a pointed mouth pliers to clamp the buckle of the
rotating bracket.
Remove the rotor springs on the rotating shaft, this deck is the rotating bracket. Remove the rotation axis,
separate the rotating bracket
⑸
, and the damping device.
CAUTION:
●
During the disassembly process, the material should be protected to prevent damage to the paint surface.
●
Pay attention when removing the buckle to prevent damage to the buckle.
●
Be careful not to lose your own spring when disassembling rotation brackets.
●
If you replace the new outer cover, you need to pay attention to whether the process on the outer cover
①
whether the length is too long, if it is too long, you must cut it short.
●
[1] The rotating bracket of the outer cover of the fuel tank has contained the scallion;