Zontes ZT350-EURO V 2022, Руководство по обслуживанию

Страница: 104 / 118

13-GUARD BAR COMPONENT
103
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1144300-003000 ZT350-X upper left guard bar 1
2 1251100-060000 Non-standard bolts M10×1.5×90 (Dacromet) 2
3 1144300-003000 ZT350-X upper left guard bar 1
4 1144300-004000 ZT350-X upper right guard bar 1
5 1251300-057093 Non-standard nut M10×1.5(Dacromet) 2
6 1244300-028000 O-ring φ11.8×2.65(inner diameter×wire diameter) 2
7 1244300-025000 ZT350-X bumper protection glue 2
8 1251100-082093 Non-standard bolts M10×1.5×20(Dacromet) 2
9 1244300-027000 ZT350-R guard bar waterproof rubber stopper 2
10 1144300-006000 ZT350-X lower right bumper 1
12 1250305-009091 GB6187.1 M12×1.25(White Zinc) 2
13 1144300-005000 ZT350-X lower left bumper 1
Fig1 GUARD BAR
COMPONENT
Guard bar component
PROCEDURE:
●
Guard bar assembly
One hand of the bumper assembly uses a 14# ring wrench to fix the bolt
⑵
, and the other hand uses a 14#
sleeve to remove the nut
⑵
.After pulling out the two bolts (2), remove the upper left guard bar. Re-insert the two
bolts (2) into the gasket and the frame.
Fix the nut Φ with a 17# ring wrench with one hand and remove the bolt
⑾
with a 14# sleeve with the other
hand.After pulling off the two bolts, remove the left and right under the barrier. Insert the two bolts back into the
bracket and frame.
If you need to disassemble the left and right upper bumper components, first pry the waterproof rubber plug in
one word, remove the bolts with 14#sleeve, remove the protective glue, and remove the O -type ring.
CAUTION:
●
Remove the cushion, fuel tank assembly, enclosure assembly, side cover assembly, and lower streaming
assembly.
●
After removing the barrier, the bolts connected to the hanging piece and the bracket should be inserted back.
GB5187 non-standard bolt M12×1.25×95(10.9
garde/dacromet)
1251112-023000 11 2