Zontes ZT350-EURO V 2022, Руководство по обслуживанию

Страница: 60 / 118

8-FRONT FORK COMPONENT
59
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 190100-409051 ZT310-VX right rearview mirror (dark gray) 1
2 1100100-831000 ZT350-GK front disc brake main pump assembly (φ14) 1
4 1134300-018000 ZT350-R balance block (aggravated) 1
5 1244100-042000 ZT250-R right handle bar rubber sleeve 1
7 1250205-031091 GB70.1M6×30(stainless steel) 2
Fig.5 FRONT FORK
COMPONENT
Right handlebar component (old model)
ZT350-X second generation right handle switch (dark
gray TFT-750)
1184300-018000 3 1
ZT310-X Second Generation Right Handlebar Switch
(TFT)
1184200-145000 6 1
PROCEDURE:
●
Remove the right rear-view mirror
Tighten the rearview mirror rod in one hand, remove the nut with the other hand with 14#sleeves
④
, remove
the small pads
③
, spring
②
and large pads
①
.Take the rearview mirror
⑴
from the front disc brake main pump.
●
Hand guard
Right hand holds the rubber sleeve and balance block with 5#inner hexagonal to twist the bolt on the balance
block to the state in the figure, then out of the balance block
⑷
, and then remove the right hand to remove the
rubber cover.
●
Right hand handle auxiliary switch
Fix the main pump of the front disc brake in the right hand, and remove the bolt
⑺
with the other hand with
5#inner hexagonal tools.Find the connection of the wire plug of the auxiliary switching
⑹
and remove it.
CAUTION:
●
The vehicle level should be fixed and checked before checking.
●
Check whether the liquid surface of the brake liquid should be between the "Observation Window 3/4".
●
It is strictly forbidden to rinse the oil cup with high pressure water.
●
The small pads of the rearview mirror need to align the cut slot on the rear visual mirror bolt.
●
The right hand holds the switch to refer to the operation of the throttle line.
●
The seams between the main pump and the auxiliary switch shall be aligned with the triangle on the right hand.