Zontes ZT350-EURO V 2022, Руководство по обслуживанию

Страница: 32 / 118

5-SINGLE ROCKER COMPONENT
31
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1181200-118000 Wheel speed sensor
（
A
）
1
2 1251100-101000 Non-standard bolt M6×12 (304 stainless steel) 1
3 1251100-123093 non-standard bolt M8×25 (color zinc) 2
4 1250104-006097 GB16674M6×12 (chromed/HH) 4
5 1274200-119000 Single rocker rear flat fork tubing bracket 4
6 1224300-110000 Reverse buckle Velcro strap (20×200mm) 1
7 1251100-117093 Non-standard inner hex bolt M8×25 5
8 1274200-058000 ABS induction ring (60 teeth) 1
9 1100100-784000 ZT350-GK rear brake disc (265×4.5) 1
10 4024200-048000 ZT310 single rocker rear axle assembly (with bolt) 1
11 1250305-002091 GB6187.1 M8
（
White zinc
）
5
12 1251100-191000 Non-standard bolt M12×1.5×38 (environmental color) 5 After-sale
PROCEDURE
：
●
Rear axle outer assembly
If you only need to remove the rear axle assembly, only need 14# sleeve to remove 2 bolts
⑶
, remove the caliper
from the mounting plate and remove the rear axle assembly.
If the rear flat fork needs to be replaced, continue the following steps:
Remove the bolt
⑵
with 4# hexagon socket and remove the wheel speed sensor
⑴
from the rear disc brake
caliper mounting plate.
Use 8# socket or ring wrench to remove 4 bolts
⑷
and remove the oil pipe support
⑸
.
Untie the tie band
⑹
on the right side of the frame, remove it from the harness fixing seat, press the buckle, pull
off the wheel speed sensor connector
①
and remove the wheel speed sensor
⑴
.
●
Rear axle assembly
Fix the head of the bolt
⑺
with 6# hexagon socket and remove the nut
⑾
with 13# sleeve.
Remove the induction gear ring
⑻
and the disc brake disc
⑼
from the rear axle assembly
⑽
.
The rear axle assembly
⑽
includes the rear axle and five bolts
⑿
. The bolts
⑿
are interference fit with the rear
axle of the single rocker arm. If the bolts are disassembled and replaced separately, the connection must be firm
and reliable, otherwise it may loosen and cause accidents.
CAUTION:
●
The replacement of the bolts
⑽
separately must be secure and reliable.
Fig.6 REAR WHELL
COMPONENT
Rear axle assembly
12