Zontes ZT350-EURO V 2022, Руководство по обслуживанию

Страница: 84 / 118

8-FRONT FORK COMPONENT
83
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1244300-019000 Caliper exhaust screw rubber cap 1
2 1251100-308000 Disc brake exhaust screw M6 1
4 1251513-013000 Disc brake pipe copper washer φ 15× φ 10.2 × 1.5 2
6 1251100-101000 Non-standard bolt M6×12 (304 stainless steel) 1
7 1181200-118000 Wheel speed sensor
（
A
）
1
8 1224100-044000 Wheel speed sensor clamp 4
9 1224300-093000 Reverse buckle Velcro strap (20×150mm) 1
10 1250105-138093 GB5789M6×20 (environmental color) 1
PROCEDURE:
●
Drain brake fluid
Place the oil pan under the front disc brake caliper.
First open the screw rubber cap (1), wear waterproof gloves, remove the bolt (2) with an 8# Torx wrench,
remove the bolt (3) with a 14# Torx wrench, and remove the copper washer (4).
Remove the two bolts
⑸
with an 8# hexagon socket to remove the front disc brake caliper from the front shock
absorber.
First take out the wheel speed sensor
⑺
from the cable clip
⑻
, untie the Velcro strap
⑼
, then remove the bolt
⑹
with a 4# hexagon socket, and remove the wheel speed sensor
⑺
from the front disc brake caliper. Arrange
the wheel speed sensor wires neatly.
Use an 8# sleeve to remove the bolt
⑽
. Then remove the FC-HU tubing.
CAUTION:
●
Be sure to wait for the muffler and engine to cool down completely before disassembling. The horizontal
support of the vehicle should be fixed before disassembly and assembly.
●
For the relevant precautions of brake fluid, please refer to the previous description.
●
When replacing the oil pipe, it is recommended to replace two copper washers
⑷
at the same time, and the
bolt 3 can not be replaced if there is no damage.
5 1251100-303093 GB70.1 Hexagon socket head bolt M10×1.5×60 (grade
12.9 / environmental protection color Zinc)
Fig.29 FRONT FORK
COMPONENT
ABS brake system A-3
Disc brake oil pipe bolts M10×1×22 (with exhaust
threaded holes)
1 1251100-307000 3
2