Zontes ZT350-EURO V 2022, Руководство по обслуживанию

Страница: 89 / 118

9-WRAPAROUND COMPONENTS
88
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1174200-009000 ZT310-X Front left turning light 1
2 ZT350-X surrounds the left panel 1
3 1224200-034000 ZT310-X left decorative board of big plastic cover 1
4 1210201-393000 ZT310-X label of left panel of big plastic cover 1
5 1251100-101000 Non-standard bolt M6×12 (304 stainless steel) 2
6 1274100-057095 Flanging bushing φ6.2×φ8.4×3.5
＋
φ14×1.5 2
7 1244100-052000 Buffer rubber of flanging bushing (φ8.5×φ14×1) 2
8 1251300-063093 Plywood M6×11×15(color Zinc) 4
9 1224100-010000 ZT250-S swell nail 2
10 1251200-033093 Non-standard self-Tapping bolt ST4.2×12 4
Fig.3 WRAPAROUND
COMPONENTS
Left surround panel component
PROCEDURE:
●
Disassemble the left siege panel sign
The signs of the left surround panel are pushed out of the signs from the back of the left surrounding panel
component to clean the remaining stagnation.
●
The left turn light component
Remove 4 self -attack screws in the left turn light component, and turn the left turn lights. Remove it from the
panel component.
●
The left panel component
Remove 2 bolts of the left panel component and remove the band
⑹ ⑹ ⑺
.
Use a small cross screw knife to press down the center of the expansion nail and remove the two expansion
nails.
Separate the left surround panel component from the left decorative panel component.
Take 2 plywood
⑻
from the left surrounding panel.
Take 2 plywood
⑻
from the left surrounding decorative board.
CAUTION:
●
Pay attention to prevent damage parts when disassembling. Protective measures are required to prevent
scratches.
●
When removing from the left surround panel component to the light, pull the cable.