ZIEHL-ABEGG ZETADYN 3C, Оригинальная инструкция по эксплуатации

Страница: 21 / 204

5.3 Wiring
The device is equipped with cable screw glands, cable bushes and cut-outs to be able to feed the
various cables into the ZETADYN 3C. The following table and
fi
gures show their assignment and
position.
Power line Bottom cable screw gland
cable motor Top or side EMC cable screw gland
Brake resistor cable Top or side EMC cable screw gland
Control cables (X-I, X-O, DCP) Bottom cut-out
Brake and brake air monitor cable Side cable bush
Encoder cable Side cable bush
5.3.1 Cable laying ZETADYN 3C011 to ZETADYN 3C032
1
2
Bottom cable entry
1 Control cables (X-I, X-O, DCP)
2 Power line
3
4
1
2
Top cable entry
1 Brake resistor cable
2 cable motor
3 Brake cable, encoder cable
4 Plastic caps
5.3.2 Cable laying ZETADYN 3C040 up to ZETADYN 3C074
1
2
Bottom cable entry
1 Control cables (X-I, X-O, DCP)
2 Power line
3
4
1
2
Top cable entry
1 cable motor
2 Brake resistor cable
3 Brake cable, encoder cable
4 Plastic caps
Information
The fastening plate with cable screw gland can be removed from the frequency converter for easier
connection of the power line!
Original operating instructions
ZETADYN 3C
Electrical installation
R-TBA08_03-GB 1619 Part.-No. 00163322-GB
21/204