ZIEHL-ABEGG ZETADYN 3C, Оригинальная инструкция по эксплуатации

Страница: 108 / 204

Start-up and acceleration
RF Controller enable
V_1 Positioning speed
V_3 Travel Speed
RV1 / RV2 Direction default
RB Controller ready
MB_Brake Mechanical brake
11.3 Optimizing start up behavior
Optimizing the start up behavior is only necessary if there is a negative in
fl
uence on the travel comfort
(e.g. through start up jerks)
Information
•
Proper installation condition (rail guides, car suspension, transmission oil
fi
lling, etc.)
• The car must be empty and the counterweight completely loaded. Start-up for all loading conditions
can only be optimally adjusted in under these conditions
• The speed control parameters must be correctly set in the
Controller
menu (see "Commissioning /
Setting the speed control" chapter)
Start-up time sequence
T_0 Time until motor contactors have been opened
T_1 Time until magnetizing fl ux has been built up (only with asynchronous motors)
T_2 Time until brake has been opened
T_3 Time in which the motor is controlled to speed 0 or accelerated to V_T3
RF Controller enable
Vx Travel speed V_3
RVx Travel direction
ST Controller failure
MB_Brake Mechanical brake
RB Controller ready
The various times can be set in the
Start
menu
Original operating instructions
ZETADYN 3C
Travel options
R-TBA08_03-GB 1619 Part.-No. 00163322-GB
108/204