ZIEHL-ABEGG ZETADYN 3C, Оригинальная инструкция по эксплуатации

Страница: 56 / 204

7.2.4 Meaning of the arrows appearing in the display:
M o t o r- T y p e n s c h i l d
à E n c o d e r & B C
A n l a g e - d a t e n
S t e u e r u n g
Selecting a menus in the menu level
M o t o r - T y p e n s c h i l d
n 1 2 8 r p m
à
f 1 8 . 0 H z
I 4 0 . 4 A
Selecting changeable parameters in the menu
A n l a g e - D a t e n
M O D _ n * M i t D . . i 2
n * 9 4 r p m
_ _ D 0 . 2 4 0 m
Selected parameter can be modi
fi
ed, but is blocked at the mo-
ment. The block can be implemented by assigning a password
or functionally (dependent on another parameter)
S t a r t
T _ 2 1 . 0 s
T 2 _ r e a l 0 . 8 s
T _ 3 0 . 1 s
Value / function of a parameters is only displayed for informa-
tional purposes and cannot be modi
fi
ed.
Serial-No ---------
0 1
Z E T A D Y N 3 B F 0 1 3 - A
S N : 0 6 1 2 8 2 3 8 / 0 0 0 1
3 . 1 7 - 1 0 3 7
i
Zahl
Current position (page number) in the INFO-menue
MMC- Recorder
□
R E C _ M O D O n
R E C _ C F G 0
R E C _ N U M 0
The recorder for recording measurements on the memory card
is activ
S t a r t E R R
T _ 2 1 . 0 s
T 2 _ r e a l 0 . 8 s
T _ 3 0 . 1 s
ERR
Failure of the frequency inverter
The device must be switched off
7.3 Entering numerical values
Entering numerical parameter values can be done using two different facilities:
7.3.1 Continuous change of a parameter value
After selecting the parameter, the parameter value can be set by continuously changing the numerical
value using the & key.
Short keypress:
Number is incremented/decremented by 1
Long push on the key:
Number automatically increases/decreases until the key is released.
Encoder & BC
|
-
"
ENC_INC 1024 I
|
-
"
2036
Encoder resolution
7.3.2 Changing individual digits
When changing a parameter by a large value, it is possible to change the individual digits separately
After selecting the parameter, use to the select the desired digit and change from 0
…
9 with the &
key
The selected digit is marked with an arrow.
Encoder & BC
|
- "
ENC_INC 1024 I
|
-
"
2036
W
Original operating instructions
ZETADYN 3C
Operation and parameterising
R-TBA08_03-GB 1619 Part.-No. 00163322-GB
56/204