ZIEHL-ABEGG ZETADYN 3C, Оригинальная инструкция по эксплуатации

Страница: 148 / 204

13.5.12 Information texts
An information text appears in the display for approx. 2 s for faults which are not saved in the fault list.
Information text
Cause
CO-Interrupt During a non distance-dependent travel (speeds V4 ... V7) the travel contactors are
opened.
During the halt process the motor contactors open before the timer T5b has expired.
The number of CO interruptions is counted in the
Statistics/SCO
menu.
RF-Interrupt The controller enable (signal CE) is deactivated during travel.
During the halt process the controller enable (signal CE) is deactivated before the
timer T5b has expired.
The number of CE interruptions is counted in the
Statistics/SCE
menu.
s1 = 0 cm During the distance-dependent delay phase from travelling speed V2 or V3 to position-
ing speed V1 the signal is already deactivated for the positioning speed V1.
Attention! n*>n Calculated speed n* is greater than the speed n speci
fi
ed on the rating plate.
automatic
pre-signment?
After changing the parameter V*, you can con
fi
rm the request " automatic pre-sign-
ment?" with yes or no.
Until rope change
xxx
travels possible
Shows the remaining travels with the actual rope.
Information will be shown in the display until pressing the [ESC] button.
Original operating instructions
ZETADYN 3C
Error diagnosis
R-TBA08_03-GB 1619 Part.-No. 00163322-GB
148/204