ZIEHL-ABEGG ZETADYN 3C, Оригинальная инструкция по эксплуатации

Страница: 61 / 204

Start-up
| -
"
CO C01
|
-
"
C01
Contactor monitoring
Select parameter
"CO"
De
fi
nition of the contactor monitoring
The contactor monitoring has to be connected to the inverter obligatory!
Start-up
|
-
"
BR Off
|
- "
3*NO
Brake monitor
Select parameter
"BR"
De
fi
nition of the brake monitoring
Start-up
| -
"
P1P2 Off
|
-
"
PTC
Motor temp. monitor
Select parameter
"P1P2"
Motor temperature monitoring
Start-up
|
-
"
K_START 1.0
|
- "
1.0
Control vers. at start
Select parameter
"K_START"
Start gain
Multiplicative factor for the parameter "Controller/SPD_KP"
Increasing the PI controller during the start-up
Start-up
|
- "
SPD_KP 1.00
|
-
"
1.00
Controller basic gain
Select parameter
"SPD_KP"
Multiplication factor to modify the calculated basic ampli
fi
cation SPD_C
8.4 Automatic operating-curves default
Using the automatic operating-curve defaults, the parameters responsible for operating curves and
travel speeds are pre-assigned
dependent on the "installation nominal velocity "V*"
.
After changing the parameter
V*
, you can con
fi
rm the request " automatic pre-signment?" with yes or
no.
Precon
fi
gured parameters through the automatic operating defaults:
"Acceleration" menu "Deceleration" menu "Travelling" menu
A_POS
R_POS1
R_POS2
A_NEG
R_NEG1
R_NEG2
V_2
V_3
Original operating instructions
ZETADYN 3C
Start-up
R-TBA08_03-GB 1619 Part.-No. 00163322-GB
61/204