ZIEHL-ABEGG ZETADYN 3C, Оригинальная инструкция по эксплуатации

Страница: 32 / 204

5.12.5 Binary traveling speed default
Standard (CONFIG=15:ZA_BIN)
Travel speed V_3
Binary inputs
BIN2 BIN1 BIN0
- 0 0 0
V1 0 0 1
V2 0 1 0
V3 0 1 1
V4 1 0 0
V5 1 0 1
V6 1 1 0
V7 1 1 1
5.13 Digital outputs (X-OUT)
5.13.1 Digital outputs X-OUT
The connection terminal X-OUT is equipped with 4 digital outputs as zero potential relay contacts with
normally open function. The functions of the outputs are pre-parameterised but can be assigned other
functions by changing the parameters.
5.13.1.1 Connection X-OUT
X-OUT
O11 O14 O21 O24 O31 O34 O44 O41
(1) (2) (3) (4) (5) (7) (8) (11) (10) (6) (9)
1
1* 8* 7* 6* 5* 4* 3* 2*
Connection of the digital outputs X-OUT
1 Modulation
() terminal designation of connector
* Wire number of the pre-assembled connecting lead X-O
5.13.2 Digital output X-BC:PWM
The connection terminal X-BC is equipped with 1 digital output, connection PWM , with normally open
function. The functions of the output is pre-parameterised but can be assigned another function by
changing the parameter.
Information
WARNING!
The PWM output does not have zero potential. The GND potential of the internal 24 V
mains supply is connected!
Original operating instructions
ZETADYN 3C
Electrical installation
R-TBA08_03-GB 1619 Part.-No. 00163322-GB
32/204