ZIEHL-ABEGG ZETADYN 3C, Оригинальная инструкция по эксплуатации

Страница: 113 / 204

11.6.2 Arch travel with path-dependent deceleration
If the selected
fi
nal speed (V_2 or V_3) is not reached with short
fl
oor clearances, the frequency
inverter carries out arch travel. Independent of the speed reached upon the interrupt time point, the
identical crawl paths are always achieved through the arch travel.
6
When the switch off point for the traveling speed is reached, the con
fi
gured
fi
nal speed
is not yet reached.
The motor continues to be accelerated.
The point from which the deceleration must be initiated is calculated.
X
Deceleration is initiated
7
Travel at positioning speed V_1.
8
Positioning speed V_1 is switched off.
Motor continues to decelerate.
9
Speed 0
Output MB is switched off
Brake must operate immediately
The motor continues to be fed with current
10
The current to the motor is switched off
Output RB is switched off
Motor contactors must drop immediately
6
x
8 9 10 7
Arch travel
RF Controller enable
V_1 Positioning speed
V_3 Travel Speed
RV1 / RV2 Direction default
RB Controller ready
MB_Brake Mechanical brake
That means that during a normal trip and during arch travel, the deceleration path V3
R
V1 (S_31) and
the crawl path V1
R
speed 0 (S_1, only with DCP 1/DCP 3) are identical.
Original operating instructions
ZETADYN 3C
Travel options
R-TBA08_03-GB 1619 Part.-No. 00163322-GB
113/204