ZIEHL-ABEGG ZETADYN 3C, Оригинальная инструкция по эксплуатации

Страница: 33 / 204

5.13.2.1 Connection PWM
X-BC
PWM
24V
BC
(1)
(2)
(3)
(4)
Kx
Connection of the digital output PWM
Kx Control relay
() terminal designation of connector
5.13.3 Technical data
X-OUT X-BC (PWM)
Short-circuit-proof no*
Min. switching capacity 5 mA / 12 VDC 5 mA / 24 VDC
Max. switching capacity 2 A / 250 VAC 5 mA / 24 VDC
Cable cross section max. 2,5 mm
²
max. 1,5 mm
²
CAUTION!
Caution!
* In order to protect the relay contacts, switched inductivities must be provided with an external
suppressor circuit (suppressor diode, RC element).
5.13.4 Terminal assignment X-OUT
The output assignments can be con
fi
gured. The con
fi
guration can be implemented by:
•
Presetting the used control system (assignment corresponding to the control requirements)
•
Free con
fi
guration
Implement con
fi
guration of the digital outputs in the
Control system\CONFIG
menu.
Please refer to the "Parameter list/Control menu" chapter for a description of the individual parameters
The output assignments dependent on the con fi guration:
Con fi gura-
tion
Outputs
O11 - O14 O21 - O24 O31 -O34 O41 - O44 PWM
00:Free Fault* MB_Brake* MotContact* V < V_G1* AUS*
01:ZA_IO Err MB_Brake MotContact V < V_G1 AUS
03:BP_IO Err MB_Brake MotContact V < V_G1 AUS*
08:KN_IO Err MB_Brake MotContact V < V_G1 AUS*
11:NL_IO Err MB_Brake MotContact V < V_G1 AUS*
13:SS_IO Err MB_Brake MotContact V < V_G1 AUS*
15:ZA_BIN Err MB_Brake MotContact V < V_G1 AUS*
16:WL_IO Err MB_Brake MotContact V < V_G1 AUS*
21:ST_IO Err MB_Brake MotContact V < V_G1 AUS*
24:CSILVA Err MB_Brake MotContact V < V_G1 AUS*
25:S+S MotContact MB_Brake V=O Err AUS*
27:MAS_BIN Err MB_Brake MotContact Off* AUS*
30:KS_IO Err MB_Brake MotContact V < V_G1 AUS*
31:KL_IO fault MB_Brake MotContact EVAC.DIR AUS*
32:
S_SMART
Err MB_Brake MotContact SD AUS*
* The function of the outputs can be changed
Original operating instructions
ZETADYN 3C
Electrical installation
R-TBA08_03-GB 1619 Part.-No. 00163322-GB
33/204