ZIEHL-ABEGG ZETADYN 3C, Оригинальная инструкция по эксплуатации

Страница: 144 / 204

Error no. Error text Error cause M S
570 PFU Alarm
Error:
Monitor contact of the power feedback unit opens during operation of
the ZETADYN
Remedy:
Check connection of the feedback unit function monitor,
Check function monitor of power feedback unit,
Check the function of the power feedback unit
The error is automatically acknowledged when the monitor contact of the
power feedback unit reconnects.
●
571 PFU:Stdby remains in
place
Error:
PFU is not yet active 1 s after start of travel
●
575 MOT: Temp. -Alarm
Error:
Motor temperature monitor triggered during the trip (error evaluation
only if error no. 575 is entered in the mask function)
Remedy:
Check the parameter in the "Motor name plate" menu,
check the motor's duty cycle,
check the motor for winding short,
check the encoder,
Check the brake function
● ●
582 BR:T2 too small
Error:
Brake does not open within time T2 (only active if brake monitor is
switched on)
Remedy:
Check the brake triggering,
check the brake opening time,
check the con
fi
gured brake opening time "T_2" in the "Start" menu and
increase if necessary
●
583 BR: Fault Travel
Error:
Brake monitoring contacts triggered during travel
Remedy:
Check the brake triggering,
check the monitoring contacts,
check the power supply of the brakes
Information:
•
Negated function: If entered in the mask, the error leads to immediate stop of
travel
• Error does not lead to blocking of the ZETADYN with parameter LOCK-
BR="ON"
● ●
584 BR: Fault Travel
Error:
Brake monitoring contacts triggered during travel
Fault message at end of travel with additional information = 0:
Brake monitor contacts have switched during travel but the brake was not
closed
Fault message without immediate interruption of travel and additional informa-
tion
≠
0:
Brake was closed during travel
Additional information:
Indicates consequential fault
Remedy:
Check the brake triggering,
check the monitoring contacts,
check the power supply of the brakes
Information:
Error does not lead to blocking of the ZETADYN with parameter LOCK-
BR="ON"
● ●
585 BR: T5 too small
Error:
Brake does not close within time T5 (only active if brake monitor is
switched on)
Remedy:
Check the brake triggering,
check the brake closing time,
check the con
fi
gured brake opening time "T_5" in the "Stop" menu and
increase if necessary
●
586 BR: Stop-Error
Fault:
Monitoring contact of the brake brie
fl
y signals "Brake closed and then
"Brake open" again longer as the time T5 (only active with the brake monitor
switched on)
Remedy:
Check the brake triggering,
check the brake closing time,
check the con
fi
gured brake opening time "T_5" in the "Stop" menu and
increase if necessary
Original operating instructions
ZETADYN 3C
Error diagnosis
R-TBA08_03-GB 1619 Part.-No. 00163322-GB
144/204