ZIEHL-ABEGG ZETADYN 3C, Оригинальная инструкция по эксплуатации

Страница: 157 / 204

Carrying out the load-free alignment with SSI-encoder
MMC Recorder
->Encoder adjust.
Safety gear
HW-Ident.
Select menu
Encoder adjustment
Encoder-adjust.
|
-
"
ENC_OFF 0.00 DEG
|
-
"
0.00
Encoder Offset
Select parameter
"ENC_OFF"
Enter "ENC_OFF=0"
Encoder-adjust.
|
-
"
ENC_ADJ Off
|
- "
On
Encoder adjustment
Select parameter
"ENC_ADJ"
Switch on encoder adjustment with "ENC_ADJ=ON"
CHECK or
START adjustment?
[Esc][x][CHK][START]
Start Encoder-adjustment with
[START]
Press inspection!
[Esc]
Keep the inspection run push-button pressed.
Wait.Check encoder
function.
+514 +512 INC/P
The motor is powered in phase U and the rotor to zero of the next pole.
Encoder check, check the motor data for plausibility.
- Display of number of expected (calculated) impulses / pole pair (e.g. 512)
- Display of impulses counted between the poles (e.g. 514)
Wait
+12.9A -6.5A -6.47A
Rotor is held in zero point of the next pole
- Display of motor current of phases U V W
Difference within
one pole +110.70
°
Adjust SSI encoder
diff. to ZERO ...
Offset value (electrical angle, 360
°
per pole)
Original operating instructions
ZETADYN 3C
Special functions
R-TBA08_03-GB 1619 Part.-No. 00163322-GB
157/204