ZIEHL-ABEGG ZETADYN 3C, Оригинальная инструкция по эксплуатации

Страница: 53 / 204

6 Accessories
6.1 Operating terminal ZETAPAD
The ZETAPAD is an operating module that is independent of the frequency inverter. It can be used to
operate and con
fi
gure all ZETADYN 3 type frequency inverters.
When using longer connection lines, remote control of the frequency inverter is feasible.
6.1.1 Mounting / Fastening
The fastening takes place with the provided magnetic stripes, which will be af
fi
xed to the back-side,
on the front-side of the frequency inverter and all magnetisable surfaces.
Two keyhole notches are available on the rear for mounting the ZETAPAD to non-magnetic surfaces
(see Fig.).
6.1.2 Dimensions
Mounting ZETAPAD to ZETADYN 3
ZETAPAD dimensions
6.1.3 Connection
The connection has to be effected on the RJ45-female plug of the operating terminal and the
ZETADYN 3 (X-PAD).
Connection cable
CAT5 network cable, 8-core
both sides RJ-45 plug, 8-pole
maximum line length: 50 m
line cross-section >= AWG26
CAT5
Connection ZETAPAD
Original operating instructions
ZETADYN 3C
Accessories
R-TBA08_03-GB 1619 Part.-No. 00163322-GB
53/204