ZIEHL-ABEGG ZETADYN 3C, Оригинальная инструкция по эксплуатации

Страница: 110 / 204

Start-up variations
RF Controller enable
V_1 Positioning speed
V_3 Travel Speed
RV1 / RV2 Direction default
RB Controller ready
MB_Brake Mechanical brake
T_1 Flux build-up time
T_2 Brake opening time
T_3 Speed=0
K_START MOD1 / MOD2 (Speed control)
MOD3 (position- & speed control)
MOD4 / MOD5 (position control)
SPD_KP Base ampli
fi
cation speed controller
11.4 Optimizing the acceleration
The acceleration torque is de
fi
ned by the parameter in the
Accelerating
menu. By changing the
parameter values, you can adapt the curve shape to the requirements
Acceleration ramp
RF Controller enable
V_1 Positioning speed
V_3 Travel Speed
RV1 / RV2
Direction default
RB Controller ready
MB_Brake Mechanical brake
A_POS:
Acceleration preset in m/s
²
. A higher value causes greater acceleration and thus a steeper ramp
R_POS1:
Setting the lower round off A higher value causes a softer round off
R_POS2:
Setting the upper round off. A higher value causes a softer round off.
Information
To achieve optimum starting behavior:
•
The motor contactors must be switched instantaneously with the digital output "RB"
•
The brakes must be switched instantaneously with the digital output "MB"
Original operating instructions
ZETADYN 3C
Travel options
R-TBA08_03-GB 1619 Part.-No. 00163322-GB
110/204