WTC MedWeld 4000, Руководство оператора

Страница: 106 / 261

Weld Schedules
MedWeld 4000 Operator’s Guide Modified: 9/17/08 4 - 7
M-032116 Programs #T03300, #T02300 and #T02400
For example, the following two functions will have the action shown in
the diagram below:
60 IMPULSE= nn HEAT CY, nn COOL CY (nn=1-99)
This function defines the length of a weld impulse. It tells the weld
processor that the next function in the schedule should pulsation
weld (providing heat cycles followed by cool cycles, rather than
just heat cycles).
When this function appears before any weld function, the control
displays IMP (impulse) rather than CY (cycles) to indicate the weld
control will pulsation weld.
Pulsation welding provides a specified number of impulses. (An
impulse is a number of heat cycles—when weld current flows—
followed by a number of cycles when current does not flow.)
Consider the following schedule:
60 IMPULSE = 10 HEAT CY, 10 COOL CY
20 WELD 04 IMP 65%I
In this example, the weld processor will actually fire for 10 cycles
at 65% heat, then wait for 10 cycles with NO heat,
and repeat this
pattern 4 times .
This function only affects the next function in a weld schedule. It
should appear before every weld or slope function you want to
pulsation weld in the schedule.
99%
20%
%I
3cy
8cy 8cy
3cy 3cy
40%
45%
50%
IMPULSE=03 HEAT CY, 08 COOL CY
SLOPE 03 IMP 40%I TO 50%I
Time (Cycles)
99%
20%
%I
10cy 10cy 10cy
10cy 10cy
10cy
10cy
65%
IMPULSE=10 HEAT CY, 10 COOL CY
WELD 04 IMP 65%I
Time (Cycles)