Spirit flow-x, Справочник по функциям

Страница: 322 / 350

5-322
Flow-X─ Function Reference
Flow-X IO Functions - fxDoubleChronometry
Function inputs and outputs
Function
inputs Remark EU SW tag Range Default
Name Optional tag name, tag description
and tag group
Index Index number INDEX 1..4 1
Flow input
channel
number Number of the digital input channel FLOWCHAN
Start DI
channel
number Channel number of the digital input
that is to be used as the Start signal STRTCHAN 0
Start DI logic 1: Positive
2: Negative STRTLOGIC 1..2
Stop DI channel
number Channel number of the digital input
that is to be used as the Stop signal.
Note: the same digital input may be
used for both Start and Stop of
measurement
STOPCHAN 0
Stop DI logic 1: Positive
2: Negative STOPLOGIC 1..2
Start minimum
delay time * After the Reset command has been
given the function will wait for at least
this delay time before considering the
activation of the Start digital input sec STRTMINDLY 0..1e9 0
Start maximum
delay time * After the Reset command has been
given the function will wait for no
longer than this delay time before the
Start digital input must have been
activated
0 disables this delay check sec STRTMAXDLY 0..1e9 0
Stop minimum
delay time * After the Reset command has been
given the function will wait for at least
this delay time before considering the
activation of the Stop digital input.
0 disables this delay check
Note: The stop minimum delay time
must be defined when a common
digital input is used as both the Start
and Stop signals
sec STOPMINDLY 0..1e9 0
Stop maximum
delay time * After the Reset command has been
given the function will wait for no
longer than this delay time before the
Stop digital input must have been
activated.
0 disables this delay check
sec STOPMAXDLY 0..1e9 0
Number of
pulses per
revolution Applies for flow meter that provide a
direct pulse signal (typically turbine
and Positive Displacement (PD)
meters)
To exclude the influence of PLSPERREV 1..1e9 1