Sony MVS-8000X SystemMVS-7000X System, Руководство пользователя

Страница: 73 / 706

USO
RESTRITO
Names and Functions of Parts of the Control Panel
73
Name Description
AUX
delegation
buttons
• These select the AUX bus.
• When you press a button, turning it on, this
selects the assigned bus as the AUX bus.
• You can make the rightmost button a
[SHIFT] button, in which case each button
can be used to select two buses.
For details of the buses that can be selected,
see
“Bus Selection” (page 89).
AUX cross-
point
buttons
• These select the source signal to be
assigned to the AUX bus.
• When you press a button, turning it on, this
selects the assigned video/key source
signal and assigns it to the bus selected
with the AUX delegation buttons.
• To select a key, hold down the [KEY] button
and press the AUX cross-point button to
which the desired key signal is assigned.
• You can make the rightmost button a
[SHIFT] button, in which case each button
can be used to select two video/key source
signals.
• When one of the DME 1 V/K to DME 4 V/K
buses is selected with the AUX delegation
buttons, this selects the video side currently
visible on the DME, and if you hold down
the AUX delegation button, you can also
select the reverse side of the video.
[AUX
DSPLY]
[DEST] [KEY] Indication
Off Off Off Background A/B bus source
signal names
On Off Off
Video source signal names for
AUX bus
On On Off Bus names for AUX bus
On Off On Key source signal names for
AUX bus
Ch
a
p
te
r 2
M
e
n
u
s
and
Co
n
tr
o
l P
a
n
e
l
used as AUX bus cross-point selection buttons, with the
source name display showing the source names or the bus
names (AUX panel-less function).
AUX delegation buttons
AUX cross-point buttons
For details of AUX mix transition operation, see “AUX
Mix Transitions” (page 119).
c
AUX CTRL (AUX control) button
This switches the cross-point control block to the AUX
operating mode.
d
DEST (destination) button
When you press this button, turning it on, the source name displays show the names of the buses assigned to the AUX delegation buttons.
e
KEY button
When you press this button, turning it on, the source name
displays show the names of the key source signals assigned
to the AUX cross-point buttons, and they are now
selectable.
f
AUX DSPLY (AUX display) button
This switches the source name displays to the AUX
operating mode (by default showing the video source
signal names).
g
A/B bus control block
Select the source signals for the background A/B buses.
h
Source/bus name displays
In the AUX operating mode, these show the information in
the following table, according to the states of the [AUX
DSPLY], [DEST], and [KEY] buttons.
b
AUX MIX button
When AUX bus is selected using the AUX delegation
button, press this button, turning it on, to execute an AUX
mix transition.
Multifunction Flexi Pad Control Block
You can use the Multifunction Flexi Pad control block for
creating and recalling snapshots, wipe snapshots, DME
wipe snapshots, key snapshots, effects, shotboxes, and
macros, and making transition rate settings and key
adjustments.