Sony MVS-8000X SystemMVS-7000X System, Руководство пользователя

Страница: 478 / 706

USO
RESTRITO
478
Snapshot Operations in the Flexi Pad Control Block
Control
block Temporary
attribute to
apply Button
Cross-point
control block
A/B bus
cross-point
hold
[XPT HOLD] button in
the background A/B bus
Key cross-
point hold [XPT HOLD] button in
the key bus
a)
Key disable [XPT HOLD] button in
the key bus
b)
Flexi Pad
control block Effect
dissolve [EFF DISS] button
Auto
transition
[AUTO TRANS] button
1
In the M/E-1 bank Flexi Pad control block, press the
[SNAPSHOT] button.
This assigns the Flexi Pad control block to snapshot
operations. The numeric display shows the last
selected bank number and the register number last
recalled on the bank.
2
Select the bank for recall.
See step
3
(page 477) in “Saving a snapshot in the
Multifunction Flexi Pad control block.”
3
To apply temporary attributes (see page 472) , press the
following buttons, turning them on.
Ch
a
p
te
r 14
S
n
a
p
s
h
o
ts
For details, see “Assigning a Region to the Region
Selection Buttons in the Numeric Keypad Control Block or
Multifunction Flexi Pad Control Block” (page 570).
As an example, to recall a snapshot on the M/E-1 bank, use
the following procedure.
Deleting a snapshot in the Flexi Pad
control block (standard type or simple
type)
As an example, to delete a snapshot on the M/E-1 bank,
use the following procedure.
1
In the M/E-1 bank Flexi Pad control block, press the
[SNAPSHOT] button.
This assigns the Flexi Pad control block to snapshot
operations. The numeric display shows the last
selected bank number and the last recalled register
number on the corresponding bank.
2
Select the bank for the register containing the snapshot
you want to delete.
See step 3 (page 477) in “Saving a snapshot in the
Multifunction Flexi Pad control block.”
3
Hold down the [STORE STATS] button, then hold
down the button in the memory recall section
displaying the number of the corresponding register.
The button you pressed goes off, and this deletes the
snapshot. The [STORE STATS] button lights amber.
Notes
On a simple type Flexi Pad control block, it is not possible
to delete a snapshot.
a) When Xpt Hold mode is selected in setup.
b) When Key Disable mode is selected in setup.
For details of the operation mode of the [XPT HOLD]
button, see “Setting the operation mode of the key bus
[XPT HOLD] button” (page 625).
Notes
•
The cross-point hold and key disable settings are
maintained until you next press the [XPT HOLD]
button.
•
Applying temporary attributes does not affect the
contents of the register.
4
Press the button in the memory recall section which
shows the desired register name.
The button you pressed lights yellow, and this recalls
the snapshot.
The numeric display shows the selected register
number after the bank number.