Sony MVS-8000X SystemMVS-7000X System, Руководство пользователя

Страница: 554 / 706

USO
RESTRITO
554
Selecting the State After Powering On (Start Up Menu)
Ch
a
p
te
r 18
S
y
s
te
m
S
e
tu
p
(S
y
s
te
m
)
Selecting the State at Start-up
1
In the status area of the System >Start Up menu, select
the device to which the settings are to apply.
2
In the <Start Up Mode> group, select one of the
following modes.
Resume: When this is on, Resume mode is enabled.
Custom: When this is on, Custom mode is enabled.
Notes
The Resume mode is only valid when a switcher or
control panel is selected for the setting.
3
When Custom mode is selected, in each of the
<Setup> group and <Initial Status> group, select one
of the following.
User: When this is on, user-defined settings are used
for the Setup or Initial Status settings. For the
method of saving the user-defined settings,
see the
next item .
Factory: When this is on, factory default settings are
used for the Setup or Initial Status settings.
4
To confirm the settings, press [Execute]. If you want
to cancel the setting changes without saving them,
press [Clear].
When [Execute] is pressed, a confirmation message
appears.
5
Select [Yes].
Saving the Initial Status settings
1
After selecting the devices to which the settings apply
to, in the System >Start Up menu, press [Init Status
Define].
A confirmation message appears.
2
Press [Yes].
This saves the initial status settings other than the
“setup” settings for the selected devices in non-volatile
memory within the respective devices.
For details about the settings which will be saved, see
“Data Saved by [Setup Define] and [Initial Status
Define]” (page 677).
Setting Automatic Loading of
Register Data at Power On (Autoload
Function)
To have specified data read in at power on, in the System
>Start Up menu, press [Power On File Load], turning it on.
This enables the autoload function.
When the autoload function is enabled, a directory
“PWON_LD” appears in the corresponding File menu.
For details about saving data which can be loaded by the
autoload function, see “Saving Files Recalled by
Autoload” (page 544).
Saving User-Defined Settings
Saving the Setup settings
1
After selecting the devices to which the settings apply
to, in the System >Start Up menu, press [Setup
Define].
A confirmation message appears.
2
Press [Yes].
This saves the setup settings for the selected devices in
non-volatile memory within the respective devices.
For details about the settings which will be saved, see
“Data Saved by [Setup Define] and [Initial Status
Define]” (page 677).