Sony MVS-8000X SystemMVS-7000X System, Руководство пользователя

Страница: 244 / 706

USO
RESTRITO
244
Color Corrector Functions
Knob Parameter Adjustment Setting values
1 Top Top position
–100.00 to +100.00
2 Left Left position
–100.00 to +100.00
3 Right Right
position
–100.00 to +100.00
4 Bottom Bottom
position
–100.00 to +100.00
5 Soft Degree of
softness of
box 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Size Pattern size 0.00 to 100.00
2 Soft Degree of
softness of
pattern edge 0.00 to 100.00
5 Pattern Pattern
number 1 to 24
Knob Parameter Adjustment Setting values
1 Size Pattern size 0.00 to 100.00
2 Soft Degree of
softness of
pattern edge 0.00 to 100.00
Ch
a
p
te
r 9
Co
lo
r Co
rr
e
c
to
r
Notes
When [Mask 2] is selected in the Secondary CCR
menu, linked to this setting it automatically changes
from [Mask 2] to [Mask 1].
3
Press [Mask1 Adjust].
The Mask1 Adjust menu appears.
4
In the <Mask Source> group, select the mask source.
Box: signal from dedicated box generator
Pattern: signal from dedicated pattern generator
5
Depending on the selection in step 3 , adjust the
following parameters.
When Box is selected
When Pattern is selected
For the pattern selection, you can also press [Mask Ptn
Select] in the Mask1 Adjust menu, then use the Mask
Ptn Select menu.
Press any of the displayed patterns (standard wipe
patterns 1 to 24) to select it, then you can adjust the
following parameters.
6
When selecting the pattern as a mask source, set the
pattern modifiers as required.
When turning [Position] on and setting the pattern
position
Knob Parameter Adjustment Setting values
1 Position H Horizontal
position
–200.00 to +200.00 a)
2 Position V Vertical
position
–200.00 to +200.00
a)
a) See “Setting the wipe position (Positioner)” (page 169).
When turning [Multi] on and replicating the same
pattern
Knob Parameter Adjustment Setting values
1 H Multi Number of
repetitions of
pattern
horizontally 1 to 63
2 V Multi Number of
repetitions of
pattern
vertically 1 to 63
3 Invert Type Replication
layout
1 to 4
a)
a) See “Setting the wipe pattern replication (Multi)” (page 171).
When turning [Aspect] on and setting the aspect
ratio of the pattern
Knob Parameter Adjustment Setting values
1 Aspect Aspect ratio –100.00 to +100.00
a)
a) See “Setting the wipe pattern aspect ratio (Aspect ratio)” (page 171).
When turning the [Angle] on in the <Rotation>
group and slanting the pattern
Knob Parameter Adjustment Setting values
1 Angle
Angle of
pattern
rotation
–100.00 to +100.00 a)
a) See “Angle” (page 170).
When turning [Speed] on in the <Rotation> group
and rotating the pattern at a fixed rate
Knob Parameter Adjustment Setting values
1 Speed Rotation
rate of
pattern
–100.00 to +100.00 a)
a) See “Speed” (page 170).
7
To invert the mask source, return to the Primary CCR
menu and press [Pri/Sec Mask Invrt], turning it on.