Sony MVS-8000X SystemMVS-7000X System, Руководство пользователя

Страница: 181 / 706

USO
RESTRITO
Wipe Pattern Operations in the Multifunction Flexi Pad Control Block
181
Knob Parameter Adjustment Setting values
1 H Horizontal
position
–200 to +200
2 V Vertical position
–200 to +200
Knob Parameter Adjustment Setting values
1 P Pattern limit
range 0
a)
to +100
b)
(%)
Ch
a
p
te
r 5
W
ip
e
s
When border is selected
Parameter group [1/2]
Knob Parameter Adjustment Setting values
1 W Border width 0 to 100
Parameter group [2/2]
Knob Parameter Adjustment Setting values
1 L Luminance 0 to 100
2 S Saturation 0 to 100
3 H Hue 359 to 0
When soft border is selected
Parameter group [1/2]
Knob Parameter Adjustment Setting values
1 W Border width 0 to 100
2 I Degree of
softening of
inside of border 0 to 100
3 O Degree of
softening of
outside of
border 0 to100
Parameter group [2/2]
Knob Parameter Adjustment Setting values
1 L Luminance 0 to 100
2 S Saturation 0 to 100
3 H Hue 359 to 0
When soft edge is selected
Knob Parameter Adjustment Setting values
1 S Degree of
softening of
edge 0 to 100
When edge matte is selected
Knob Parameter Adjustment Setting values
1 L Luminance 0 to 100
2 S Saturation 0 to 100
3 H Hue 359 to 0
Buttons for positioning the wipe pattern
POS (position): Adjusts the position of the wipe pattern.
CNTR (center): Returns the wipe pattern position to the
center.
When you press the [POS] button, the alphanumeric
display first shows the name of the parameter, “H” or “V,”
and then the value of the parameter.
When the [POS] button is lit green, you can adjust the
position of the wipe pattern with the control knobs.
Buttons for setting the wipe direction
NORM (normal): Sets wipe to normal (forward)
direction.
NORM/REV (normal/reverse): Sets the wipe direction
to alternate between normal and reverse for each
transition.
REV (reverse): Sets wipe to reverse direction to normal.
Buttons for setting the wipe pattern limit
PTN LIMT (pattern limit): Enables the following
settings for the pattern limit using the control knobs.
LIMT SET (limit set): If you change the pattern size with
the fader lever then press this button, this sets the
current size as the pattern limit.
a) At 0%, executing the transition has no effect at all.
b) At 100%, the transition can be executed with the same effect as with no
pattern limit set, but when the transition completes, background buses A
and B are not interchanged.
Other buttons
EXIT: Exits the editing mode, and returns the memory
recall section to wipe snapshot mode.
KNOB 1/2: When the control knob adjustments are on two
pages, this switches between parameter group [1/2]
and parameter group [2/2].
Wipe modify clear
When the [WIPE] button is held down, holding down the
region selection button for the selected region together
returns all the wipe settings of the region to the initial
status settings.
For details of the initial status, see “Saving User-Defined
Settings” in Chapter 18 (Volume 2).