Sony MVS-8000X SystemMVS-7000X System, Руководство пользователя

Страница: 224 / 706

USO
RESTRITO
224
External Hard Disk Drive Access
Ch
a
p
te
r 7
F
ra
m
e
M
e
m
o
ry
The Ext HDD Backup/Restore menu appears.
For each partition, a list of the directory names and
number of files appears. LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7,
LPT8, LPT9
If in Dual Simul mode, select the switcher to operate
(see page 223) .
To get the hard disk drive information
Press [Refresh Status].
The Device item shows the product information for the
hard disk drive, and the names of directories.
2
Using any of the following methods, select a logical
drive (FMHDD1 to FMHDD15).
•
Press directly on the list to select.
•
Turn the knob.
Knob Parameter Adjustment Setting values
1 Partition Partition
selection 1 to 15
3
In the <Backup> group, do either of the following.
•
To replace the existing data, press [Replace].
•
To save in addition to the existing data, press
[Append].
A popup window for confirming file saving appears.
Notes
When you execute [Replace], all of the saved files in
the logical drive is erased immediately before the
saving operations.
4
Press [Yes].
This starts the file saving operation. If there is no
directory, a directory is automatically created, and the
files are saved within it. A progress bar and numerical
indication appear to show the progress of the
operation.
When the operation is completed, a popup window
reading “Completed.” appears.
5
Press [OK].
To rename a directory
Select a directory in the list, and in the button area press
[Rename].
In the keyboard window that appears, enter the new
directory name, and press [Enter]. The name of a directory
is limited to eight characters.
Recalling Files
You can recall all of the saved files on the hard disk drive
into frame memory.
1
Carry out steps
1
and
2
of the procedure
“Saving
Files” (page 223)
.
Notes
It is not possible to select a partition (FMHDD1 to
FMHDD15) of a hard disk in which no file is saved.
2
In the <Restore> group, do either of the following.
•
To replace the existing data with the recalled data,
press [Replace].
•
To add the recalled data to the existing data, press
[Append].
A popup window for confirming file recall appears.
Notes
When you execute [Replace], any existing data in
frame memory is lost immediately before the recalling
operations.
3
Press [Yes].
This starts the file recall operation. A progress bar and
numerical indication appear to show the progress of
the operation.
When the operation is completed, a popup window
reading “Completed.” appears.
4
Press [OK].
Notes
The following names cannot be used:
CON, PRN, AUX, CLOCK$, NUL, COM0, COM1,
COM2, COM3, COM4, COM5, COM6, COM7, COM8,
COM9