Sony MVS-3000 System, Руководство пользователя

Страница: 55 / 315

55
Executing a Transition
Chapt
er
3
Sig
nal Se
lec
tion and
T
ra
ns
itions
execution continues for the time specified by the
dedicated transition rate in the menu setting, as far as
the state of the next transition.
For details about settings, 1 “Selecting the Bank to
Make the Settings” (p. 251) .
To set the transition rate when the pattern limit is
released
1
In the <Pattern Limit Release> group of the Edge/
Direction menu (1164), select one of the following.
Auto Trans Rate: Use the transition rate set in the
transition control block
Independ Trans Rate: Independent transition rate
2
If you selected “Independ Trans Rate” in step
1
, adjust
the following parameter.
Executing an Auto Transition
The following two modes can be used.
Cut
A cut switches instantaneously from the current video to
the new video. When the next transition is a key transition,
the key cuts in or out instantaneously.
Auto transition
The transition from the current video to the new video is
carried out automatically at a constant rate, using the
transition effect selected as the transition type.
You can set the transition rate in advance
( 1 p. 52) .
Transition control block
To execute a transition on a switcher bank by a button
operation, use the following procedure in the transition
control block.
To carry out an instantaneous cut transition: Press the
[CUT] button.
To carry out a gradual transition: Press the [AUTO
TRANS] button.
This executes the transition at the preset transition rate
(
1
p. 52) .
While the transition is executing, the [AUTO TRANS]
button lights amber. When it completes the button
turns off.
To complete a partially executed transition
instantaneously: Press the [CUT] button.
The [AUTO TRANS] button turns off.
Executing a Transition with the
Fader Lever (Manual Transition)
Using the fader lever, you can manually control the
progress of transition from the current video to the new
video using the transition effect selected as the transition
type. Moving the fader lever from one end of its travel to
the other completes the transition.
To execute a manual transition with the transition control
block fader lever, use the following procedure.
To carry out the transition completely: Move the lever
over the full range of its travel.
To pause a partly executed transition: Stop moving the
fader lever.
No. Parameter Adjustment
1 Transition Rate Independent transition rate
AUTO TRANS button
CUT button Fader lever