Sony MVS-3000 System Скачать руководство пользователя страница 305

Страница: 305 / 315

305

Error Messages

ppen

dix

Cannot access the directory (-20).

2561: Frame Memory >External Device >Ext HDD Format

In the above menu, when [5 Partition] or [15 Partition] is pressed, this

message appears if an external HDD directory could not be accessed.

The external HDD is busy (–22).

2561: Frame Memory >External Device >Ext HDD Format

In the above menu, when [5 Partition] or [15 Partition] is pressed, this

message appears if the external HDD is in use and cannot be accessed. Try

again after you check that the access lamp of the HDD or the indicator of the

menu is turned off.

Import

Cannot create the clip file, because

the number of selected files is

insufficient.

7162: File >All, External File >Import/Export

In the above menu, when importing a clip file, this message appears if

insufficient files are selected to make up the clip.

Install

No Task.

Select a package on the list.

7316.10: Engineering Setup >System >Install/Unit Config >Install

In the above menu, the package for installation was not selected. Select a

package to be installed.

An error occurred during the install

process.

For more details, see Page 9900.

7316.10: Engineering Setup >System >Install/Unit Config >Install

In the above menu, the menu software installation package does not match

the model on which it is to be installed.

Not Found.

The software package does not exist

on the removable disk.

7316.10: Engineering Setup >System >Install/Unit Config >Install

In the above menu, the software package to be installed was not found.

Check that the removable disk is correctly inserted, and try the installation

once more.

Internal Error: Local Disk is unknown

Local disk is incorrect or not

formatted.

To format the local disk, please

execute “Format” on Page 7317.

When starting up the menu system, an error was found on the local disk.

Execute format local disk in menu 7317 (Engineering Setup >System

>Maintenance).

Internal Error: Local Disk (System Data)

The system data partition of local disk

is damaged. The local disk needs to

be reformatted. Please execute local

disk format on Page 7317.

Please make sure to save all data in

the user data partition of local disk

drive to any other device or media,

before reformatted.

When starting up the menu system, an error was found on the local disk.

Execute format local disk in menu 7317 (Engineering Setup >System

>Maintenance).

Internal Error: Local Disk (User Data)

The user data partition of local disk is

damaged, and all data is lost. The

local disk needs to be reformatted.

Please execute local disk format on

Page 7317.

When starting up the menu system, an error was found on the local disk.

Execute format local disk in menu 7317 (Engineering Setup >System

>Maintenance).

Invalid Name

Empty...

2512: Frame Memory >Still >Freeze/Store

In the above menu, a Store was carried out without specifying a name.

Alternatively,

71XX: File Menu

7171: File>Configure>Directory

In the above menus, when renaming a file or creating a directory, the name

was not entered. Enter the name correctly.

The file exists already...

2512: Frame Memory >Still >Freeze/Store

In the above menu, the file name specified when [Store] was executed

already exists in the switcher. Specify a different name.

Icon

Message

Description

Содержание MVS-3000 System




























































































































































































































































































































Результаты поиска

Содержание MVS-3000 System

Отзывы:

Бренды по названию

Популярные бренды

Sony MVS-3000 System, Руководство пользователя

Результаты поиска

Содержание MVS-3000 System

Отзывы:

Бренды по названию

Популярные бренды