manualshive.com logo in svg

Sony MVS-3000 System, Руководство пользователя

Поделиться
Скачать
Sony MVS-3000 System Скачать руководство пользователя страница 302

302

Error Messages

  A

ppen

dix

Specified FM OutCh was locked (–7). 2565: Frame Memory >External Device >Restore from DDR/VTR

In the above menu, when [Backup] is pressed, this message appears if the 

specified frame memory output channel is locked.

Not enough free register area for 

Backup or Restore process (–10).

2565: Frame Memory >External Device >Restore from DDR/VTR

In the above menu, when [Backup] is pressed, this message appears if 

there is not enough space to carry out the backup.

Prepare failed, not any file was found 

on this board (–11).

2565: Frame Memory >External Device >Restore from DDR/VTR

In the above menu, when [Backup] is pressed, this message appears if no 

image is present.

Backup failed, not prepared yet (–12). 2565: Frame Memory >External Device >Restore from DDR/VTR

In the above menu, when [Backup] is pressed, this message appears if not 

yet ready.

Backup failed, Clip recall failed (–13).

2565: Frame Memory >External Device >Restore from DDR/VTR

In the above menu, when [Backup] is pressed, this message appears if All 

One Clip ID Recall failed (internal processing error).

Prepare failed, Clip create failed (–14). 2565: Frame Memory >External Device >Restore from DDR/VTR

In the above menu, when [Backup] is pressed, this message appears if All 

One Clip creation failed (internal processing error).

Prepare failed, insufficient Clip id 

(–15).

2565: Frame Memory >External Device >Restore from DDR/VTR

In the above menu, when [Backup] is pressed, this message appears if 

there are not enough Clip IDs (internal processing error).

Prepare failed, symbol files create 

failed (–16). 

2565: Frame Memory >External Device >Restore from DDR/VTR

In the above menu, when [Backup] is pressed, this message appears if 

marker frame file creation failed (internal processing error).

Prepare failed, all one Clip recall failed 

(–17).

2565: Frame Memory >External Device >Restore from DDR/VTR

In the above menu, when [Backup] is pressed, this message appears if All 

One Clip Recall failed (internal processing error).

ERROR (–19). Bad register number.

2565: Frame Memory >External Device >Restore from DDR/VTR

In the above menu, when [Backup] is pressed, this message appears if 

Register Number is invalid (internal processing error).

Prepare failed, because there is clip 

playing (–22).

2565: Frame Memory >External Device >Restore from DDR/VTR

In the above menu, when [Backup] is pressed, this message appears if 

processing failed during clip playback.

Change Password

Failed.

The password was not changed.

7317.1: Engineering Setup >System >Maintenance >Setup Operation Lock

In the above menu, the password was not changed.

Create Key Frame

[Create Key Frame] cannot be 

executed.

FMx is not assigned to a user region.

2515: Frame Memory >Still >Create >Key Frame

In the above menu, an attempt was made to execute [Create Key Frame], 

but it failed because the frame memory output (FMx) is not assigned to a 

user region.

7331.4: Make the assignment in the Engineering Setup >Switcher >Config 

>User1-8 Config menu, and try again.

[Create Key Frame] cannot be 

executed.

Key Frame Register is locked. (UserX)

2515: Frame Memory >Still >Create >Key Frame

In the above menu, an attempt was made to execute [Create Key Frame] 

using a locked register (UserX region). Unlock the register.

[Create Key Frame] cannot be 

executed.

Key Frame Register is busy. (UserX)

2515: Frame Memory >Still >Create >Key Frame

In the above menu, an attempt was made to [Create Key Frame] using a 

register (UserX region) into which files are being loaded. Try again after file 

loading has finished.

[Create Key Frame] cannot be 

executed.

Key Frame Register is being edited. 

(UserX)

2515: Frame Memory >Still >Create >Key Frame

In the above menu, an attempt was made to execute [Create Key Frame] 

using a register (UserX region) with which a keyframe creating or editing 

operation is proceeding. Try again after the keyframe operation has finished.

[Create Key Frame] cannot be 

executed.

There is no free Key Frame. (UserX)

2515: Frame Memory >Still >Create >Key Frame

In the above menu, an attempt was made to execute [Create Key Frame] for 

a UserX region with insufficient usable keyframes.

Icon

Message

Description

Содержание MVS-3000 System




























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды