Sony MVS-3000 System Скачать руководство пользователя страница 250

Страница: 250 / 315

250

Settings Relating to Video Switching

hap

r 1

8 S
w

itc

r S

etu

Settings Relating to Video

Switching

Selecting the Bank to Make the
Settings

In the Engineering Setup >Switcher >Transition menu
(7334), select the bank to which the settings apply, then
make the settings.

Setting the transition preview mode

In the <Transition Preview> group of the Engineering
Setup >Switcher >Transition menu (7334), select either of
the following.

One Time:

The transition preview ends after a single

transition.

Normal:

Switching the [TRANS PVW] button on or off

switches between the transition preview mode and the
normal mode.

Selecting the independent key transition

mode of the transition control block

In the <Key Transition> group of the Engineering Setup
>Switcher >Transition menu (7334), select either of the
following.

Same:

The transition settings for the On and Off directions

are the same.

Independ:

The transition settings for the On and Off

directions can be set separately.

Selecting the background transition flip-

flop mode

In the Engineering Setup >Switcher >Transition menu
(7334), press [Bus Toggle] to switch between on and off.

On:

Flip-flop mode

Off:

Bus fixed mode

For details,

“Fader Lever Operation in Bus Fixed

Mode” (p. 56)

Enabling or disabling the fade-to-black

function

In the <FTB> group of the Engineering Setup >Switcher
>Transition menu (7334), press the program output name
to toggle between On and Off.

On:

When the [FTB] button is pressed, a fade-to-black is

carried out.

Off:

Even when the [FTB] button is pressed, no fade-to-

black is carried out.

The PGM2 to PGM4 settings are only valid in Multi
Program mode or DSK mode.

Setting a preset color mix

Open the Engineering Setup >Switcher >Transition
>Preset Color Mix menu (7334.1).

In the <Stroke Mode> group, select whether to carry
out a transition in one stroke or two strokes.

Normal:

Carries out a preset color mix with two

transition operations.

Single:

Carries out a preset color mix with a single

transition operation.

In bus fixed mode

(

p. 250)

, the setting is fixed to

“Single.”

In the <Non Drop Key> group, select the key setting
for a transition including a key.

To carry out the transition with the key state
maintained, press [Key1] to [Key4], turning them on.

If each time a transition ends the transition type is to
return to the previous setting, press [One Time
Enable].

Settings relating to fader lever operations

To select the way in which the fader lever position and the
transition progress are related, use the following
procedure.

Open the Engineering Setup >Switcher >Transition
>Transition Curve menu (7334.2).

In the <Fader Curve> group, select the fader lever
operation mode.

Normal:

The transition progress is linear, according to

the fader lever position. (Factory default setting)

Adv Tally Mode:

When the fader lever is moved from

the end of its travel, the tally is output slightly
before the transition starts.

Notes

Содержание MVS-3000 System




























































































































































































































































































































Результаты поиска

Содержание MVS-3000 System

Отзывы:

Бренды по названию

Популярные бренды

Sony MVS-3000 System, Руководство пользователя

Результаты поиска

Содержание MVS-3000 System

Отзывы:

Бренды по названию

Популярные бренды