Sony MVS-3000 System Скачать руководство пользователя страница 173

Страница: 173 / 315

173

Snapshot Operations in the Menus

Chap

ter
1

naps

To play the clip as soon as it is recalled, press [Auto
Play], turning it on.

Snapshot Status Display

The Snapshot >Snapshot >Attribute menu (6321) displays
the following information.

Region name:

The selected region name appears in the

upper part of the list.

Register number

Register name

Write-protected status:

When the register is write-

protected, a letter “L” appears.

Empty status:

When the register is empty, an “E” (for

“empty”) appears.

Attribute settings:

The attributes set for a register are

shown by the following character codes.

• When the cross-point hold is set

• When an effect dissolve is set

• When an auto transition is set

• When a GPI output is set

• When a clip event is set

Setting Key Snapshot Attributes

Applying key snapshot attributes

Open the Snapshot >Key Snapshot >Attribute menu
(6351).

The status area shows the region names, register
numbers, and whether the registers are locked or not.

Press the region display in the upper part of the list,
and in the selection window select the region.

You can select more than one region.

Press [OK].

Select a register.

In the <Recall Mode> group, set the state for save and
recall operations.

XPT:

Only the key material selection data is saved or

recalled.

Modifier:

Only the key modifier settings are saved or

recalled.

Transition:

Only the independent key transition

settings are saved or recalled.

Creating and Saving a Master
Snapshot

To save a master snapshot, recall the Snapshot >Master
Snapshot >Store menu (6311) and refer to the operation in

“Creating and Saving a Master Timeline with the Menu”
(

p. 163)

Recalling the Store menu

Open the Snapshot >Master Snapshot >Store menu
(6311).

The status area shows the master snapshot register
names, register lock status, register number for each
region, and so on.

If required, press the following buttons in the status
area to change the region display.

M/E, P/P:

Indicates assignment of M/E-1 (ME1), P/P

(P/P).

User:

Indicates the User1 (USR1) to User8 (USR8)

assignments.

Misc:

Indicates the Router (RTR) assignment.

Displayed

character string

Attributes set

A, B

Cross-point hold is set for the A or B

background bus.

1, 2, 3, 4

Cross-point hold is set for one of the

key 1 to 4 buses.

Cross-point hold is set for the utility

bus.

Aux

Cross-point hold is set for one of the

AUX buses.

Fm1, Fm2

Cross-point hold is set for one of the

frame memory 1 and 2 buses.

RTR

Cross-point hold is set for the Router

region.

Displayed

character string

Attributes set

Duration value

The effect dissolve attribute is set,

with the displayed duration.

Displayed

character string

Attributes set

Auto transition is set.

Displayed

character string

Attributes set

Port number

GPI output is set for the port of the

displayed number.

Displayed

character string

Attributes set

Clip event is set.

Содержание MVS-3000 System




























































































































































































































































































































Результаты поиска

Содержание MVS-3000 System

Отзывы:

Бренды по названию

Популярные бренды

Sony MVS-3000 System, Руководство пользователя

Результаты поиска

Содержание MVS-3000 System

Отзывы:

Бренды по названию

Популярные бренды