Sony MVS-3000 System Скачать руководство пользователя страница 307

Страница: 307 / 315

307

Error Messages

ppen

dix

The external HDD is busy (–22).

2546: Frame Memory >External Device >Ext HDD Backup/Restore

In the above menu, when [Rename] is pressed, this message appears if the

external HDD is in use and cannot be accessed. Try again after you check

that the access lamp of the HDD or the indicator of the menu is turned off.

Restore

Success!!

But some files were not restored.

2562: Frame Memory >External Device >Ext HDD Backup/Restore

In the above menu, recalling a file from the external HDD was correctly

done.

However, some files were not restored because of a different video format or

file corruption.

Success!!

But the number of folder exceeds the

limit (–12) and the files expected for

the folders were restored in the default

folder.

Or the name was changed because it

was the same file name.

2562: Frame Memory >External Device >Ext HDD Backup/Restore

In the above menu, recalling a file from the external HDD was correctly

done. However, the limit on the number of folders was reached, and

therefore files were restored to the default folder. Alternatively, the file name

was changed because a file of the same name already exists.

Success!!

But the number of folder exceeds the

max limit (12) and the files expected

for the folders were restored in the

default folder (–50)!

2565: Frame Memory >External Device >Restore from DDR/VTR

In the above menu, recalling a file from the external device was correctly

done.

However, the limit on the number of folders was reached, and therefore files

were restored to the default folder.

Success!!

But some still files had been renamed

because the same file name already

existed (–51)!

2565: Frame Memory >External Device >Restore from DDR/VTR

In the above menu, recalling a file from the external device was correctly

done.

However, some files were renamed because of still image file name

conflicts.

Success!!

But some Clip files had been renamed

because the same Clip name already

existed (–52)!

2565: Frame Memory >External Device >Restore from DDR/VTR

In the above menu, recalling a file from the external device was correctly

done.

However, some clips were renamed because of clip name conflicts.

No external HDD was found (–2).

2562: Frame Memory >External Device >Ext HDD Backup/Restore

In the above menu, an attempt was made to execute [Restore] but the

external HDD could not be recognized. Check that the external HDD is

correctly connected.

Format operation failed (-10).

2562: Frame Memory >External Device >Ext HDD Backup/Restore

When [Restore] was pressed in the above menu, formatting of the HDD

failed.

Format operation failed (-11).

Cannot access the partition (–12).

2562: Frame Memory >External Device >Ext HDD Backup/Restore

In the above menu, an attempt was made to execute [Restore] but the

logical drives of the external HDD could not be accessed. Check that the

external HDD is correctly formatted.

Cannot access the directory (-20).

2562: Frame Memory >External Device >Ext HDD Backup/Restore

In the above menu, an attempt was made to execute [Restore] but the

directory of the external HDD could not be accessed.

Cannot access the directory (-21).

The external HDD is busy (–22).

2562: Frame Memory >External Device >Ext HDD Backup/Restore

In the above menu, an attempt was made to execute [Restore] but the

external HDD was busy and could not be accessed. Try again after you

check that the access lamp of the HDD or the indicator of the menu is

turned off.

No file was found (–40).

2562: Frame Memory >External Device >Ext HDD Backup/Restore

In the above menu, an attempt was made to execute [Restore] but the file to

be written into the external HDD was not found.

Restore operation failed (-42).

2562: Frame Memory >External Device >Ext HDD Backup/Restore

In the above menu, an attempt was made to execute [Restore] but the

recalling file from the external HDD was not completed correctly.

Restore operation failed (-43).
Restore operation failed (-46).
No directory exists (–50).

2562: Frame Memory >External Device >Ext HDD Backup/Restore

When [Restore] was pressed in the above menu, the specified directory

does not exist.

Icon

Message

Description

Содержание MVS-3000 System




























































































































































































































































































































Результаты поиска

Содержание MVS-3000 System

Отзывы:

Бренды по названию

Популярные бренды

Sony MVS-3000 System, Руководство пользователя

Результаты поиска

Содержание MVS-3000 System

Отзывы:

Бренды по названию

Популярные бренды