manualshive.com logo in svg

Samsung S3C6400X, Руководство пользователя, Страница: 870 / 1189

Поделиться
Скачать
Samsung S3C6400X Скачать руководство пользователя страница 870

 

PRELIMINARY 

S3C6400X RISC MICROPROCESSOR

 

 

 USB2.0 HS OTG 

 

26-63 

Preliminary product information describe products that are in development,

 

for which full characterization data and associated errata are not yet available.
Specifications and information herein are subject to change without notice.

 

DEVICE ENDPOINT-n INTERRUPT REGISTER (DIEPINTn/DOEPINTn)                                                                          

Endpoint_number : 0

≤

n

≤

15                                                                                                            

This register indicates the status of an endpoint with respect to USB- and AHB-related events. The application 
must read this register when the OUT Endpoints Interrupt bit or IN Endpoints Interrupt bit of the Core Interrupt 
register is set. Before the application can read this register, it must first read the Device All Endpoints Interrupt 
(DAINT) register to get the exact endpoint number for the Device Endpoint-n Interrupt register. The application 
must clear the appropriate bit in this register to clear the corresponding bits in the DAINT and GINTSTS registers. 

Register 

Address 

R/W 

Description 

Reset Value

DIEPINTn 

/ 

DOEPINTn 

0x7C00_0908 

+n*20h / 

0x7C00_0B08 

+n*20h 

R/W 

Device Endpoint-n Interrupt Register

 

32 bits 

 

DIEPINTn/ 

DOEPINTn 

Bit 

R/W 

Description 

Initial State

EPEna [31:7] 

 

Reserved 

25’h0 

IN Endpoint NAK Effective                                             
Applies to periodic IN endpoints only.                           
Indicates that the IN endpoint NAK bit set by the 
application has taken effect in the core. This bit can 
be cleared when the application clears the IN 
endpoint NAK by writing to DIEPCTLn.CNAK.              
This interrupt indicates that the core has sampled 
the NAK bit set.                                                              
This interrupt does not necessarily mean that a NAK 
handshake is sent on the USB. A STALL bit takes 
priority over a NAK bit. 

INEPNakEff 
 
 
 
 
 
 
 
 

Back2BackSETup 

[6] RO 

 
 
 
 
 
 
 
 

 

R_W 

 

Back-to-Back SETUP Packets Received 
Applies to Control OUT endpoints only. 
This bit indicates that core has received more than 
three back-to-back SETUP packets for this particular 
endpoint.  

1’b0 

INTknEPMis [5] 

R_SS_

WC 

IN Token Received with EP Mismatch                          
Applies to periodic IN endpoints only.                           
Indicates that the data in the top of the non-periodic 
TxFIFO belongs to an endpoint other than the one 
for which the IN token was received. This interrupt is 
asserted on the endpoint for which the IN token was 
received. 

1’b0 

Содержание S3C6400X






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов