manualshive.com logo in svg

Samsung S3C6400X, Руководство пользователя, Страница: 833 / 1189

Поделиться
Скачать
Samsung S3C6400X Скачать руководство пользователя страница 833

 

PRELIMINARY 

USB2.0 HS OTG 

 

S3C6400X RISC MICROPROCESSOR  

26-26

 

 

Preliminary product information describe products that are in development,

 

for which full characterization data and associated errata are not yet available. 
Specifications and information herein are subject to change without notice.

The core sets this bit to indicate a change in port 
status of one of the OTG core ports in Host mode. 
The application must read the Host Port Control and 
Status (HPRT) register to determine the exact event 
that caused this interrupt. The application must clear 
the appropriate status bit in the Host Port Control 
and Status register to clear this bit. 

 [23] 

 

Reserved 

1’b0 

FetSusp [22] 

R_SS_

WC 

Data Fetch Suspended                                                  
This interrupt is valid only in DMA mode. This 
interrupt indicates that the core has stopped fetching 
data for IN endpoints due to the unavailability of 
TxFIFO space or Request Queue space. This 
interrupt is used by the application for an endpoint 
mismatch algorithm. 
For example, after detecting an endpoint mismatch, 
the application: 

·

 Sets a global non-periodic IN NAK handshake           

·

 Disables In endpoints 

·

 Flushes the FIFO                                      

·

 Determines the token sequence from the IN Token 

Sequence Learning Queue 

·

 Re-enables the endpoints 

·

 Clears the global non-periodic IN NAK handshake 

If the global non-periodic IN NAK is cleared, the core 
has not yet fetched data for the IN endpoint, and the 
IN token received: the core generates an “IN token 
received when FIFO empty” interrupt. The OTG then 
sends the host a NAK response. To avoid this 
scenario, the application can check the 
GINSTS.FetSusp interrupt, which ensures that the 
FIFO is full before clearing a global NAK handshake. 
Alternatively, the application can mask the “IN token 
received when FIFO empty” interrupt when clearing 
a global IN NAK handshake. 

1’b0 

Incomplete Periodic Transfer                                         
In Host mode, the core sets this interrupt bit when 
there are incomplete periodic transactions still 
pending which are scheduled for the current 
microframe. 

incompIP 
 
 
 
 
incomplSOOUT 

[21] R_SS_

WC 

Incomplete Isochronous OUT Transfer                         
The Device mode, the core sets this interrupt to 
indicate that there is at least one isochronous IN 
endpoint on which the transfer is not completed in 
the current microframe. This interrupt is asserted 
along with the End of Periodic Frame Interrupt 
(EOPF) bit in this register. 

1’b0 

Содержание S3C6400X






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов