Quantum DXi6900-S, Руководство по обслуживанию на месте

Страница: 180 / 208

Chapter 3: FRU Removal and Replacement Procedures
Replacing an Expansion Module ESM Canister
Quantum DXi6900-S Field Service Manual 167
6. Connect the SAS cables to the controller with the new BBU (see DXi6900-S Cabling Diagrams on
page 190 ):
7. Reset the BBU installation date:
a. Access the Service Menu (see Accessing the DXi6900-S Service Menu on page 32 ).
b. Navigate to Hardware Configuration > Setup external Storage > Reset Array BBU date .
c. Follow the prompts to reset the age counter of the replacement BBU. Make sure to specify the
correct Array module.
8. Run Factory Detect Hardware from the Service Menu to detect the new hardware (see Factory
Detect Hardware on page 37 ).
9. In the remote management console, delete any administrative alerts and close any service tickets.
Replacing an Expansion Module ESM Canister
This section describes how to remove and replace the ESM canister in a DXi6900-S Expansion module
(EBOD) and contains the following sections:
l
Obtaining a Replacement Expansion Module ESM Canister below
l
Replacing an Expansion Module ESM Canister on the next page
Obtaining a Replacement Expansion Module ESM
Canister
Before beginning the replacement procedure, make sure that you have the required replacement kit. The
appropriate replacement Expansion module ESM canister will be provided by Quantum Customer Support.
You will need the following items to perform this procedure:
l
Replacement Expansion module ESM canister provided by Quantum Customer Support.
l
ESD grounding wrist strap (included in the replacement kit)